My CTS-V in the 1/8th mile
#1
Staging Lane
Thread Starter
Join Date: Jan 2012
Location: North Carolina
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
My CTS-V in the 1/8th mile
This is the only mods made to the car so far.
1)Pulley Swap (2.55 upper and 9.17 lower)
2)Air Raid CAI
3)Stainless Works 3" cat back exhaust
4)ID850 injectors
5)RPM cat delete pipes
6)Rated "R" RPM tuning
Wheels on the rear while at the track are ZR1 18" replicas with a 305/35/18 Mickey Thompson.
Been taking the car to the local 1/8th mile track (Dunn-Benson, NC). Over the past few weeks it cut a
1.7 60' / 7.29 @ 98 mph
1.6 60' / 7.23 @ 94 mph
and tonight was the best so far
1.59 60' / 7.06 @ 97 mph Temp 64* DA527
The car with stock wheels and tires on the DynoJet at RPM MotorSports put down 586 rwhp and 609 rwtq.
I don't think thats to bad with the stock cam, stock exhaust manifolds and stock torque converter.
BIG THANKS goes out to Ryan and the crew at RPM MotorSports.
1)Pulley Swap (2.55 upper and 9.17 lower)
2)Air Raid CAI
3)Stainless Works 3" cat back exhaust
4)ID850 injectors
5)RPM cat delete pipes
6)Rated "R" RPM tuning
Wheels on the rear while at the track are ZR1 18" replicas with a 305/35/18 Mickey Thompson.
Been taking the car to the local 1/8th mile track (Dunn-Benson, NC). Over the past few weeks it cut a
1.7 60' / 7.29 @ 98 mph
1.6 60' / 7.23 @ 94 mph
and tonight was the best so far
1.59 60' / 7.06 @ 97 mph Temp 64* DA527
The car with stock wheels and tires on the DynoJet at RPM MotorSports put down 586 rwhp and 609 rwtq.
I don't think thats to bad with the stock cam, stock exhaust manifolds and stock torque converter.
BIG THANKS goes out to Ryan and the crew at RPM MotorSports.