ryridesmotox

New cam. Once we are done building my Buddy's turbo camaro... This is going in the Cadillac. Can't wait. We are using my garage for his build so I don't have enough room to have both cars torn down.

bmylez

iTrader: (3)

That....is not a small cam.

ryridesmotox

Could have been bigger.

Sssnake

I tried a starter blanket but it really didn't help much. The car wouldn't start after a long run, engine shut off and immediate restart. I now use a thin, rigid aluminum shield I made mounted to one of the starter mounting bolts. So far everything works well.

ryridesmotox

Yea I'll need to figure something out.

Grenade19

Nice parts list. I hope Ill find a score like you did on the clutch kit

ryridesmotox

With the LS9 clutch, you have to get a flywheel that will fit the 6 bolt crank. Also, get the clutch master cylinder kit from philistine.

ryridesmotox

Parts order bump...

DW300
Fuelab 51502 regulator
Fuelab 85831filter with check valve. with 6 micron fiberglass element to run E85.

I already have fuel line.

ryridesmotox

Oh and as an aside... Summit racing is so easy to deal with... Even when the screw up was totally my fault, one call, no problem switch it out. I accidentally ordered the -10an fittings on the fuel filter housing. 5 minutes on the phone. In this day and age actual customer service is very welcome indeed... Even if its for something small and inconsequential.

ryridesmotox

And so it begins... Again... Collecting more parts for more go fast

DW300
Interceptor

Fuel pressure regulator and filter are on the way

rand49er

It never ends.

Just read this thread for the first time. Nice, early-morning read.

ryridesmotox

I'd like to think its going to end at some point... And of course you tell the wife it is going to end some day. But it won't... Building racecars... The struggle is real.