We at Stainless Works would like to say thanks to our customers and dealers for the great 2005 year we have had. On any Stainless Works header or exhaust system that you buy from us or any of our dealers, simply email us at info@stainlessworks.net for a rebate form. We are offering a $20 rebate plus a free t shirt to anyone who purchases an exhaust system or headers from our dealers or direct from us. All you have to do is mail a copy of your receipt to us, along with the rebate form, and we will send you a check for $20 plus a free t shirt. The offer is good for any headers or exhaust system purchased from October 1st through December 31st for any of our dealers, including but not limited to:

Speed Inc, T Byrne, PFYC, Speed Engineering, New Era Performance, MTI Georgia, Summit, Jegs, GMR Speed and through us direct.

Again-this rebate is direct from us-just follow the instructions above and we will send the check and shirt direct to you.

If I missed any dealers please let me know and we will add you into this thread.

Thanks for your business.

Al
Stainless Works

 

This offer applies to our CTSV headers and 3" exhaust system. Our CTSV headers are 899 retail, and are 1 3/4" primary tubes, cnc laser cut 3/8" flanges, tig welded and have a lifetime warranty. The price shown is for headers only and will require a custom pipe to be fabbed form the headers to the exhaust system.

Thanks
Al
Stainless Works

 

The data below is from Strope Speed shop in PA. They are a distributor for us and did the install.

2005 CTS V

RPM STOCK STOCK MOD MOD TQ HP
TQ HP TQ HP GAIN GAIN
2200 248.6 104.2 269.7 113 21.1 8.8
2300 252.2 110.4 270.8 118.6 18.6 8.2
2400 246.8 112.8 269.6 123.2 22.8 10.4
2500 260.4 124 270.8 128.9 10.4 4.9
2600 260.9 129.2 279.8 138.5 18.9 9.3
2700 263.9 135.7 282 145 18.1 9.3
2800 263.6 140.5 284.6 151.7 21 11.2
2900 265.8 146.8 285.6 157.7 19.8 10.9
3000 268.1 153.1 287.6 164.3 19.5 11.2
3100 271.2 160.1 291.8 172.2 20.6 12.1
3200 272.8 166.2 295.2 179.9 22.4 13.7
3300 273.4 171.8 298 187.2 24.6 15.4
3400 275 178 300.2 194.3 25.2 16.3
3500 277.1 184.6 302.8 201.8 25.7 17.2
3600 278.6 190.9 305.2 209.2 26.6 18.3
3700 282.3 198.9 309.1 217.8 26.8 18.9
3800 289.3 214.8 312.6 226.2 23.3 11.4
3900 291.5 222 316.6 235.1 25.1 13.1
4000 293 228.7 321.4 244.8 28.4 16.1
4100 294.2 235.3 325.1 253.8 32.3 18.5
4200 294.5 241.1 326.5 261.1 33.9 20
4300 296.4 248.3 326.6 267.4 33.3 19.1
4400 296.4 248.3 328.4 275.1 34.6 26.8
4500 296.2 253.8 329.7 282.5 33.5 28.7
4600 297.2 260.3 331 289.9 33.8 29.6
4700 298.4 267 333.2 298.2 34.8 31.2
4800 300.1 274.3 334.2 305.4 34.1 31.1
4900 300.1 280 336 313.5 35.9 33.5
5000 299.8 285.4 335.8 319.7 36 34.3
5100 297.5 288.8 333.8 324.1 36.3 35.3
5200 294.6 291.7 339.2 335.8 44.6 44.1
5300 291.8 294.5 338.3 341.3 46.5 46.8
5400 288.8 296.9 334.9 344.3 46.1 47.4
5500 286.5 300.1 332.2 347.9 45.7 47.8
5600 282.6 301.3 327.1 348.8 44.5 47.5
5700 280.1 304 323.7 351.3 43.6 47.3
5800 275.2 303.9 319.1 352.4 43.9 48.5
5900 268.1 301.2 315.5 354.4 47.4 53.2
6000 266.7 304.6 309.5 353.6 42.8 49
6100 265.6 308.5 304.7 353.8 39.1 45.3
6200 262 309.2 299.4 353.4 37.4 44.2
6300 259 310.7 294.5 353.3 35.5 42.6
6400 254.7 310.4 287.8 350.7 33.1 40.3
6500 251.3 311 282.6 349.8 31.3 38.8

The dyno results were using our headers, high flow cats, 3" exhaust, and a dyno tune at Stropes.

Thanks
Al
Stainless Works