ctsv fuel filter replacement
05-02-2006, 08:28 AM
#1
Teching In
Thread Starter
Join Date: Mar 2006
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
ctsv fuel filter replacement I hope someone here has done this.
I purchased a fuel filter for my ctsv and noticed that it had the quick connect metal connections (two on the backside). What is the best/easiest way to remove this filter. Is their a way to get the lines off without a special tool. If not, is this special tool easily found and sold at local autozones, and what size is it?
I purchased a fuel filter for my ctsv and noticed that it had the quick connect metal connections (two on the backside). What is the best/easiest way to remove this filter. Is their a way to get the lines off without a special tool. If not, is this special tool easily found and sold at local autozones, and what size is it?
05-02-2006, 12:50 PM
#2
TECH Addict
iTrader: (2)
Join Date: Oct 2004
Location: Miami, Fl.
Posts: 2,890
Likes: 0
Received 0 Likes
on
0 Posts
like a fuel line quick disconnect for a fuel rail? If so, they have those at any auto parts... usually comes in an variety type of pack... more than one size...
05-02-2006, 11:58 PM
#4
10 Second Club
iTrader: (11)
Join Date: Sep 2003
Location: Murrieta Ca.
Posts: 1,676
Likes: 0
Received 0 Likes
on
0 Posts
The one I use does not have a size on it. Any autoparts store will have a kit with different sizes in it. They are not expensive at all, get the whole kit.
05-03-2006, 06:31 AM
#5
Teching In
Thread Starter
Join Date: Mar 2006
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
All the kits i looked at were for A/C. The one specific fuel kit i found said it was for 1989+ GM fuel lines and had only two sizes in it, a 5/16 and 3/8 in it.... So, i hope i am all set now.
05-05-2006, 10:37 PM
#6
TECH Apprentice
iTrader: (6)
Join Date: Feb 2002
Location: Clear Lake Area, TX
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Johnny_V
All the kits i looked at were for A/C. The one specific fuel kit i found said it was for 1989+ GM fuel lines and had only two sizes in it, a 5/16 and 3/8 in it.... So, i hope i am all set now.
