The Official CTS-V Pic Thread
#664
#666
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i was just going to ask the same thing. this is a pic thread you know.
on topic, slam that thing. wheels look nice but i'd be doing my best to tuck those 295s any way i can. ridiculous fender roll/pull and an extra degree or two of negative camber will do it. don't think of tire wear as camber is responsible for 10% of tire wear, bad toe angles are what eat your tires up in a month. fwiw i'm significantly tucking a 285 and it sits extremely flush on a 10.5, but my camber isn't too aggressive. you would probably need at the very minimum 2.5-3 degrees of negative camber to fit that in there without rubbing. only negative factor i see as an obstacle is the profile of the tire being like a 35 series when it should be a 25 to get it to fit flush easier. good luck.
red always screams for polished wheels, except those look chrome (could be the lighting if i'm mistaken), but still look rather dashing.
on topic, slam that thing. wheels look nice but i'd be doing my best to tuck those 295s any way i can. ridiculous fender roll/pull and an extra degree or two of negative camber will do it. don't think of tire wear as camber is responsible for 10% of tire wear, bad toe angles are what eat your tires up in a month. fwiw i'm significantly tucking a 285 and it sits extremely flush on a 10.5, but my camber isn't too aggressive. you would probably need at the very minimum 2.5-3 degrees of negative camber to fit that in there without rubbing. only negative factor i see as an obstacle is the profile of the tire being like a 35 series when it should be a 25 to get it to fit flush easier. good luck.
red always screams for polished wheels, except those look chrome (could be the lighting if i'm mistaken), but still look rather dashing.
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Last edited by tony tone; 11-29-2011 at 07:15 AM.
#671
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yeah I plan on eventually lowering the car if I keep it. I will be doing coilovers. The wheels actually are polished. I just keep em clean! Lol.
Thanks for the compliments guys, this is a fun car.
Thanks for the compliments guys, this is a fun car.
#674
#677
#679