The Official CTS-V Pic Thread
#1242
#1244
TECH Resident
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
At first I was like
![](http://i520.photobucket.com/albums/w330/Bio248/2005%20CTS-V/20150506_134943_zpst4acrakt.jpg)
But then it rubbed like a son of a bitch and I had to raise it two inches...
Temporary ride height:
![](http://i520.photobucket.com/albums/w330/Bio248/2005%20CTS-V/20150506_160243_zpsfkzpre63.jpg)
![](http://i520.photobucket.com/albums/w330/Bio248/2005%20CTS-V/20150506_160252_zpsqnweasoz.jpg)
Currently at about 27" from ground to fender all around. Because of that the rear looks lower because of fender shapes. I had to do an emergency rubber mallet roll on the front because I bent the fender out while turning back into the parking lot. Oh well.
I'll have my fender roller back tomorrow. This weekend I'll do a good roll and pull all the way around. I want the rear to go down at least a half inch and the front to go down an inch, inch and a half. More to come!
![](http://i520.photobucket.com/albums/w330/Bio248/2005%20CTS-V/20150506_134943_zpst4acrakt.jpg)
But then it rubbed like a son of a bitch and I had to raise it two inches...
Temporary ride height:
![](http://i520.photobucket.com/albums/w330/Bio248/2005%20CTS-V/20150506_160243_zpsfkzpre63.jpg)
![](http://i520.photobucket.com/albums/w330/Bio248/2005%20CTS-V/20150506_160252_zpsqnweasoz.jpg)
Currently at about 27" from ground to fender all around. Because of that the rear looks lower because of fender shapes. I had to do an emergency rubber mallet roll on the front because I bent the fender out while turning back into the parking lot. Oh well.
I'll have my fender roller back tomorrow. This weekend I'll do a good roll and pull all the way around. I want the rear to go down at least a half inch and the front to go down an inch, inch and a half. More to come!
#1245
#1246
TECH Resident
#1248
TECH Resident
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
ride height dialed in, corner balanced and aligned.
![Name: 20150512_072916_zpszmsa2dxs.jpg
Views: 393
Size: 201.2 KB](https://ls1tech.com/forums/attachments/cadillac-cts-v-2004-2007-gen-i/658941d1501528127-official-cts-v-pic-thread-20150512_072916_zpszmsa2dxs.jpg)
front had to come up because of the corner balancing and it was rubbing pretty terrible. still looks good, though!
![Name: 20150512_072916_zpszmsa2dxs.jpg
Views: 393
Size: 201.2 KB](https://ls1tech.com/forums/attachments/cadillac-cts-v-2004-2007-gen-i/658941d1501528127-official-cts-v-pic-thread-20150512_072916_zpszmsa2dxs.jpg)
front had to come up because of the corner balancing and it was rubbing pretty terrible. still looks good, though!
#1250
TECH Resident
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
the picture is a bit misleading because it's the "good" angle to take pictures of this car from and the tires are down in ruts in the parking lot. here's a shot from the front that shows it's not completely dumped.
![Name: 20150512_072929_zps32qrqa08.jpg
Views: 310
Size: 170.0 KB](https://ls1tech.com/forums/attachments/cadillac-cts-v-2004-2007-gen-i/658927d1501528127-official-cts-v-pic-thread-20150512_072929_zps32qrqa08.jpg)
tires are all still barely tucked which means the front is technically lower than the rear because of the shapes of the fenders, but the rockers are completely level with the ground front to back. i like how it sits.
![Name: 20150512_072929_zps32qrqa08.jpg
Views: 310
Size: 170.0 KB](https://ls1tech.com/forums/attachments/cadillac-cts-v-2004-2007-gen-i/658927d1501528127-official-cts-v-pic-thread-20150512_072929_zps32qrqa08.jpg)
tires are all still barely tucked which means the front is technically lower than the rear because of the shapes of the fenders, but the rockers are completely level with the ground front to back. i like how it sits.
#1258
TECH Addict
iTrader: (19)
Join Date: Aug 2007
Location: Where the Navy tells me to go
Posts: 2,403
Received 106 Likes
on
88 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Were the other two plasti-dipped or wrapped or actually painted? Regardless, they all look great! I'd love some details on the vented hood - got any additional pics or some contact info for the owner?
#1259
TECH Regular
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thank you!
They were both wrapped in flat, but with the black ones, heīs unlucky with his wrapping and the vented hood, itīs not perfect and installed with a lot of boltīs, next time he will switch over to black rivets!
At 7th of june is next Car Meeting here in Harley Factory Frankfurt, there i will meet him again, didnīt know, if heīs a member here, met him first time at Garbage Hill, i will ask him for you!
Best regards,
Ronald
They were both wrapped in flat, but with the black ones, heīs unlucky with his wrapping and the vented hood, itīs not perfect and installed with a lot of boltīs, next time he will switch over to black rivets!
At 7th of june is next Car Meeting here in Harley Factory Frankfurt, there i will meet him again, didnīt know, if heīs a member here, met him first time at Garbage Hill, i will ask him for you!
Best regards,
Ronald