02 Z06 + TTiX + 17psi = 943 RWHP
03-03-2008, 11:48 AM
#25
8 Second Club
iTrader: (18)
Join Date: Oct 2002
Location: Waterloo, Ontario
Posts: 2,609
Likes: 0
Received 0 Likes
on
0 Posts
03-03-2008, 12:37 PM
#26
8 Second Club
iTrader: (18)
Join Date: Oct 2002
Location: Waterloo, Ontario
Posts: 2,609
Likes: 0
Received 0 Likes
on
0 Posts
Yes Fern and Canadian Performance put it all together ... Yes its Wades motor ... & Yes Road Rebel chose the cam and its his tune. Lets keep it civil guys, Wade doesn't want another war starting up & Boost master doesn't want to be caught in the middle either ...
Congrats on putting down some serious power on that dyno. I bet it will be the first ride to break 1000 on it Dave
Congrats on putting down some serious power on that dyno. I bet it will be the first ride to break 1000 on it Dave
The spies are everywhere!!!!!!!!
03-03-2008, 01:36 PM
#27
TECH Apprentice
Join Date: May 2005
Location: toronto
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
That Retard is Stroker R/T-he should point out that the retard who built the motor torqued the dampner down so it bottomed out on the oil oil pump-very nice-car had no oil pressure even with 20W50. So after pulling off the dampner and sending it out to get machined and replacing the junked oil pump it's good to go-finally. Hey let's post picks for EVERYONE TO SEE.
So Mr. Gay Master, or Sag Master or I dropped another dumbell on my head Retard Master? How did you cross the border to post this-from the trunk of Chico's car?
So Mr. Gay Master, or Sag Master or I dropped another dumbell on my head Retard Master? How did you cross the border to post this-from the trunk of Chico's car?
call 1 800 cry baby check the ip address ...till then hats off to all involved !!! i little remider of my post congrats very impressive !!! put in 3500 lb + 950 rwhp in a horsepower calculator and your e/t should be 8.9 can't wait to see this vette go to the track ...looks like the 2008 will be a good year for ya !! from corvette forum 
03-03-2008, 05:41 PM
#30
Teching In
Join Date: Sep 2004
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Hey there Rob congrats on the numbers, they are pretty wild threw an auto and all. You should put a set of drag radials and bring it to Memphis in Oct. when we go down. With that kind of power you would do ok.
03-04-2008, 08:32 AM
#32
FormerVendor
Join Date: Jun 2005
Location: Toronto,Canada
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
My car is living on borrowed time to many passes @ the track = distruction.
03-04-2008, 02:43 PM
#34
TECH Regular
iTrader: (5)
Join Date: Mar 2005
Location: Lewiston, NY
Posts: 454
Likes: 0
Received 0 Likes
on
0 Posts
Do you run at Toronto? I Hope to get up there this year. I have not run the 1/4 yet, just 1/8th at Lancaster now DunnTireRaceway. Great work on the vette. Where is the shop located? I live in Lewiston near the bridge.
03-04-2008, 03:33 PM
#35
FormerVendor
Thread Starter
iTrader: (7)
Join Date: Jan 2002
Location: Toronto, Canada
Posts: 1,940
Likes: 0
Received 0 Likes
on
0 Posts
ping2day, we do run at Toronto Motorsports Park quite a bit. When you are thinking of coming up, let me know and we'll try to get a fey guys out there to lay some rubber down and shoot the ****. CPE is located in Pickering ... ABout 1.5 hrs from Lewiston/ Niagara Falls...
03-04-2008, 03:47 PM
#36
Teching In
Join Date: Sep 2004
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
come on Rob, it would be a blast. I do agree the track is hard on parts thou. Look at my street car out a few passes and smoked out a new spec. stage 4 clutch, time for a double disk 
nevers ends.
03-04-2008, 03:57 PM
#37
TECH Regular
iTrader: (5)
Join Date: Mar 2005
Location: Lewiston, NY
Posts: 454
Likes: 0
Received 0 Likes
on
0 Posts
I'm not sure of a date, sometime early in the season. Our track opens early April and points start on the 3rd week. Maybe sometime in May. We race on Friday nights so i should be able to come up on a weekend. I think it is about 1.5hrs away, depending on the bridge.
03-05-2008, 06:15 PM
#38
FormerVendor
Thread Starter
iTrader: (7)
Join Date: Jan 2002
Location: Toronto, Canada
Posts: 1,940
Likes: 0
Received 0 Likes
on
0 Posts
boy you got isues call 1 800 cry baby check the ip address ...till then hats off to all involved !!! i little remider of my post congrats very impressive !!! put in 3500 lb + 950 rwhp in a horsepower calculator and your e/t should be 8.9 can't wait to see this vette go to the track ...looks like the 2008 will be a good year for ya !! from corvette forum
call 1 800 cry baby check the ip address ...till then hats off to all involved !!! i little remider of my post congrats very impressive !!! put in 3500 lb + 950 rwhp in a horsepower calculator and your e/t should be 8.9 can't wait to see this vette go to the track ...looks like the 2008 will be a good year for ya !! from corvette forum Last edited by SLED28; 03-05-2008 at 08:24 PM.
03-05-2008, 06:16 PM
#39
8 Second Club
iTrader: (18)
Join Date: Oct 2002
Location: Waterloo, Ontario
Posts: 2,609
Likes: 0
Received 0 Likes
on
0 Posts
boy you got isues call 1 800 cry baby check the ip address ...till then hats off to all involved !!! i little remider of my post congrats very impressive !!! put in 3500 lb + 950 rwhp in a horsepower calculator and your e/t should be 8.9 can't wait to see this vette go to the track ...looks like the 2008 will be a good year for ya !! from corvette forum
call 1 800 cry baby check the ip address ...till then hats off to all involved !!! i little remider of my post congrats very impressive !!! put in 3500 lb + 950 rwhp in a horsepower calculator and your e/t should be 8.9 can't wait to see this vette go to the track ...looks like the 2008 will be a good year for ya !! from corvette forum
03-05-2008, 07:48 PM
#40
Teching In
Join Date: Sep 2004
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Hey there Rob, what tranny did you end up going with ???. Did you put it at the front or the rear. If you put it at the front and want a killer Hutch T400 for it let me know. You would not have trannie issues then but may break everything else around it