5.3 into a 1970 nova thread :) 70 nova project- I took the long route LOL !
#21
Stock belt works perfect.... you want the one with a/c. Also for future notice to anyone that looks at this thread for info the stock upper and lower radiator hose for the 2006 chevy truck work perfect as well, with the truck setup of course.
#23
As of right now they are just sitting, but are gonna be easy to mount as there is a long rod that runs across the rear of the seat that i will use with the factory hooks. the front seats are much harder has there is a lot of wiring for air bag,heated seat,lumbar, so on so fourth.
#26
9-inch diff 4.10 Gears
Oil pan shot for the people asking truck pan cut and sealed
Ls1 brakes Passenger and driver (the shock broke) i hate pot holes):
I took the first drive in the nova this weekend and if i do say so myself very very worth every penny and long weekends i spent getting eveything installed the car is very powerful and smooth and starts on the first try
Not sure if this video will work but worth the try:
http://www.facebook.com/video/video.php?v=1447039027465
Oil pan shot for the people asking truck pan cut and sealed
Ls1 brakes Passenger and driver (the shock broke) i hate pot holes):
I took the first drive in the nova this weekend and if i do say so myself very very worth every penny and long weekends i spent getting eveything installed the car is very powerful and smooth and starts on the first try
Not sure if this video will work but worth the try:
http://www.facebook.com/video/video.php?v=1447039027465
Last edited by 96t/acj; 08-09-2010 at 04:18 PM.
#28
Wheels are in and on 18/8 boss 338
Car at the muffler shop going with the set-up i already had 2 chamber flowmaster mufflers with turn downs
The red wire ran to my fuel pump when i was doing a test run all cleaned up now
Oil pan shot for the people asking truck pan cut and sealed
Car at the muffler shop going with the set-up i already had 2 chamber flowmaster mufflers with turn downs
The red wire ran to my fuel pump when i was doing a test run all cleaned up now
Oil pan shot for the people asking truck pan cut and sealed
Last edited by 96t/acj; 09-22-2010 at 06:05 PM.
#29
The nova Ride height test fitting with new springs :2nd:
Yes my caliper was on the ground no it was not hanging from the line it was disconnect just sitting under the car.
Yes my caliper was on the ground no it was not hanging from the line it was disconnect just sitting under the car.
Last edited by 96t/acj; 09-22-2010 at 05:59 PM.
#30
Thanks a lot guys more updates...
The Motor all complete minus the air cleaner Which i cant seem to find.
Car sitting in the garage after last nights drive, that was the longest i've driven it so far. water on the ground was from filling up the radiator for the last time now that all the leaks in the system has been found The front seats of my nova have been removed, Im thinking of going in a different direction with something that will sit a little lower and be manuel seats. the wiring for the heated seat, plus the air bag, plus the 24 way option was just a little to much for my liking. ....
New two piece carpet with padding....
The Motor all complete minus the air cleaner Which i cant seem to find.
Car sitting in the garage after last nights drive, that was the longest i've driven it so far. water on the ground was from filling up the radiator for the last time now that all the leaks in the system has been found The front seats of my nova have been removed, Im thinking of going in a different direction with something that will sit a little lower and be manuel seats. the wiring for the heated seat, plus the air bag, plus the 24 way option was just a little to much for my liking. ....
New two piece carpet with padding....
Last edited by 96t/acj; 09-22-2010 at 06:16 PM.
#31
Here is the new front seats as the old ones gave me to many problems, i also added the door panels for apperance sake
Front seats (I will have to repair the bolster on the drivers seat)
Rear Seats
Front and rear Seats
Front seats (I will have to repair the bolster on the drivers seat)
Rear Seats
Front and rear Seats
#36
Thanks, a long way to go but im working on it
i lowered the ride height even more, and im in the process of changing the rear tires. i have a 225 40 18 on the rear, it was more just for mock up reasons. Going to a 275 40 18 tire for the rear. Pic soon of the new lowered ride height.
i lowered the ride height even more, and im in the process of changing the rear tires. i have a 225 40 18 on the rear, it was more just for mock up reasons. Going to a 275 40 18 tire for the rear. Pic soon of the new lowered ride height.
Last edited by 96t/acj; 09-23-2010 at 02:23 PM.