Sexy valve covers??
#25
LS1TECH & Trucks Sponsor
iTrader: (34)
I can check on the unbranded ones for you guys tomorrow, I am an edelbrock dealer as well. I keep some of their covers in stock as well, I will look into it in the morning
__________________
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
#32
i'd be looking at the edelbrock ones with the polished finish or the black look in alloy, so probably not easy to trim if they foul anything.
i have the stock brackets and coils mounted on the covers as stock
#37
these are my coils/loom as i had to mount the msd box close by. would these covers fit or would i have to relocate stuff? i understand that the coils temselves mount underneath the new covers but i wonder if the loom etc will foul them.