bad67ls

iTrader: (2)

do these guys even train their tech people? half the places ive called dont ask vehicle weight,intended use,header primary size, what tranny is in the car,gear ratio, tire size...


they just throw a generic cam at me and say "we have sold a ton of bla bla bla"

really? this is a purchace and a job i dont need to do twice.

rail2k

iTrader: (1)

Agreed at 400 a pop i want it perfect for my application custom is the only way to go

bad67ls

iTrader: (2)

its not like i am putting togather anything crazy...its a stock longblock ls2 with a ported vic jr and a carb.

but i want the most hp and torque from the combo as possible,and for it to work with everything else around it.

Prorac1

iTrader: (4)

Talk to someone on here like patrick G, or mike from rapid motorsports about a custom cam for a carbed application. The "big" cam companies are not the best place to shop for a cam for big LS power from my experience. And if you look at the guys making good power, or more power than thier combonation "should" be putting out, they usually have a custom ground cam from a smaller company. Just my .02. Eric L

bad67ls

iTrader: (2)

i just shot patrick g a pm... lets see what he has to say on the subject.