Show me your Pcv set ups
09-08-2012, 09:25 AM
#2
you can pretty much see mine in this album pic
https://ls1tech.com/forums/picture.p...ictureid=55421
Got a PCV valve that fit the LS6 type vent line, wrapped it back under the mainfold to a T off the back of the carb and brake booster. Got a $3 fuel filter and hooked it to the vent on the starboard side valve cover.
I keep meaning to plumb in a catch can cause I do get oil residue in the back of the carb line.
https://ls1tech.com/forums/picture.p...ictureid=55421
Got a PCV valve that fit the LS6 type vent line, wrapped it back under the mainfold to a T off the back of the carb and brake booster. Got a $3 fuel filter and hooked it to the vent on the starboard side valve cover.
I keep meaning to plumb in a catch can cause I do get oil residue in the back of the carb line.
09-08-2012, 06:44 PM
#3
I have one of these breathers in the oil tube
http://shop.zzperformance.com/store/...-Breather.aspx
I swaped the cheapo filter for a K&N
Small filter on the vent tube of the passenger valve cover.
PCV in the drivers side valve cover that runs to the rear of carb
http://shop.zzperformance.com/store/...-Breather.aspx
I swaped the cheapo filter for a K&N
Small filter on the vent tube of the passenger valve cover.
PCV in the drivers side valve cover that runs to the rear of carb
