Carbureted LSX Forum Carburetors | Carbed Intakes | Carb Tuning Tips for LSX Enthusiasts

What distributor gear with GMPP front drive kit?

Thread Tools
 
Search this Thread
 
Old 07-05-2013, 05:01 PM
  #1  
Staging Lane
Thread Starter
iTrader: (1)
 
CrashTestDummy's Avatar
 
Join Date: Sep 2011
Location: Pearland, Texas
Posts: 54
Likes: 0
Received 0 Likes on 0 Posts
Default What distributor gear with GMPP front drive kit?

I've done some searching, but haven't found any answers other than 'if you think you should, you might want to', so I thought I'd ask again.

We're running a LS1 in our 3rd Gen C Prepared autocross car. It has the GMPP front drive kit, and we have the recommended MSD distributor. The kit instructions and parts list don't indicate we need to run a bronze gear, but I wanted to see if anyone knows for sure. I thought I'd ask here before talking with Wegner, or someone like that. Thank you.
Old 07-05-2013, 08:02 PM
  #2  
TECH Resident
iTrader: (17)
 
ATwelveSec02Z28's Avatar
 
Join Date: Mar 2003
Location: Delaware
Posts: 904
Likes: 0
Received 5 Likes on 5 Posts

Default

I ran the bronze gear. there wasnt much wear on it.
Old 07-09-2013, 09:01 AM
  #3  
Staging Lane
Thread Starter
iTrader: (1)
 
CrashTestDummy's Avatar
 
Join Date: Sep 2011
Location: Pearland, Texas
Posts: 54
Likes: 0
Received 0 Likes on 0 Posts
Default

My builder says I should not need to replace the gear. I'll go with what I have and hope for the best.
Old 07-12-2013, 10:57 PM
  #4  
TECH Enthusiast
 
dogsballs's Avatar
 
Join Date: Nov 2006
Location: melbourne (Aus)
Posts: 743
Likes: 0
Received 4 Likes on 3 Posts

Default

i'm in same boat. all i hear is use the standard gear drive.



Quick Reply: What distributor gear with GMPP front drive kit?



All times are GMT -5. The time now is 07:34 PM.