cam questions for fast 2.0 tbi
#21
TECH Enthusiast
iTrader: (20)
Ok. What compression are you running? I wouldnt be asking but your setup is almost what im running. My heads are milled .015, thats how I bought them. I have the stock flat top LS3 pistons. And the cam that Bob at Cam Motion specd me is almost identical to what you have now. Whats the formula for figuring out final compression ratio is I guess what i need to figure
#22
TECH Enthusiast
Thread Starter
iTrader: (7)
Join Date: Jan 2011
Location: north dakota
Posts: 741
Likes: 0
Received 0 Likes
on
0 Posts
Ok. What compression are you running? I wouldnt be asking but your setup is almost what im running. My heads are milled .015, thats how I bought them. I have the stock flat top LS3 pistons. And the cam that Bob at Cam Motion specd me is almost identical to what you have now. Whats the formula for figuring out final compression ratio is I guess what i need to figure
all the calculators youll ever need!
my compression is somewhere in the 10.48:1 range and my dcr is high.... figired at 9.13 but I still run 91 pump ok