speedtrigger how much did you spray to go 10.04? if you don't mind maybe you could pm me and share jet size and just what sys you have

 

is it possible with a 6012 box
to data log a run to see shift points and max rpm? I have a afr meter that data logs but not hooked up yet as I don't know how to do it.

 

81n/69f at #5.5 flowing fuel pressure tune(About 200 hp). I pulled 8 degrees of timing. That was at #3780 race-weight.

What does your beast weigh?

 

car is 3100 and my fat *** is 230.
I think when I put a 4.56 gear in the rear it will pick up more. like I said in the other post it is pulling It's best at the 1/8 mi marker. should leave much harder. Remember my rear tire is 31 in tall

 

Sounds a lot like my set up

 

Unfortunately no. I was thinking about downloading a screen recorder so at least I could review that.

 

speedtigger Just sent you a pm.

 

had my car on a dyno yesterday and gained 43 hp will post what it runs this weekend

 

Where did the gain come from? Congrats. Eric L

 

Plugs, timing and jets. best 1/8mi.
best was 6.95 @ 98 mph.
will let you know after the weekend.

 

Well I guess the dyno numbers don't mean much, best number now is 6.93 @98.8 mph

 

So, what are the new cam specs?