Carbureted LSX Forum Carburetors | Carbed Intakes | Carb Tuning Tips for LSX Enthusiasts

MSD 6014 breaking up,backfiring through exhaust

Thread Tools
 
Search this Thread
 
Old 06-15-2018, 03:36 PM
  #1  
Teching In
Thread Starter
 
c4lhozwalte's Avatar
 
Join Date: Apr 2011
Location: alma,ar
Posts: 42
Likes: 0
Received 0 Likes on 0 Posts
Default MSD 6014 breaking up,backfiring through exhaust

truck starts fine,runs good at half throttle,but when it gets under load,it starts breaking up and the power goes away.it started this all at once.been in the truck for a few years working great.plugs look good,tried different coil packs,replaced cam sensor,there was a fault code,cleared and came right back.it has a 850 quick fuel drag carb,stock cam .82 jet plate kit.has anyone else had this come up out of the blue.
Old 07-02-2018, 04:38 PM
  #2  
Teching In
Thread Starter
 
c4lhozwalte's Avatar
 
Join Date: Apr 2011
Location: alma,ar
Posts: 42
Likes: 0
Received 0 Likes on 0 Posts
Default

ended up being a bad plug wire.thanks for no replys



Quick Reply: MSD 6014 breaking up,backfiring through exhaust



All times are GMT -5. The time now is 06:20 PM.