Question about SLP larger Diameter Y-pipe
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
SLP Part #31035
Question is: The website notes at the bottom of the page that for 98-99 some cutting and welding is required. Has anyone with a 98-99 replaced their stock "flat" Y-pipe with this? If so, how much cutting /welding was needed (pics or a description would be great)?
Thanks in advance
Question is: The website notes at the bottom of the page that for 98-99 some cutting and welding is required. Has anyone with a 98-99 replaced their stock "flat" Y-pipe with this? If so, how much cutting /welding was needed (pics or a description would be great)?
Thanks in advance
#4
Moderator
iTrader: (4)
Join Date: Nov 2003
Location: Plainfield, CT
Posts: 10,520
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Not worth the agrevation. Get headers. I have done one once (against my own advice) for a friend. You need to cut about 1-2" off the end or the cat-back is pushed back too far. Every car is a little different on this mod.