89 RS 350 swap, please help
03-31-2010, 02:57 AM
#1
Teching In
Thread Starter
Join Date: Mar 2010
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
89 RS 350 swap, please help First I wanna start off by saying I'm new to the forum so I'm sorry if this is not the best place for this post or if this is a dumb and vague question. My friend has an 89 RS camaro (305 tbi) and he is thinking about swapping a 350 truck motor we have sitting around into it. My question is what would need to be done to do such a swap, would a harness from an iroc work or is it more complicated then that? Also what are the differences between the silverado 350 and the ones in the 3rd gen's? Would any parts needed for the swap bolt right up? what all would we need to grab? We have a lot of aprts at our disposal because we know a lot of people with scrap yards. This is just a thought as of now so we are just trying to find out if this will be a quick swap or a ball buster. Thanks for any input guys!
03-31-2010, 02:58 AM
#2
Teching In
Thread Starter
Join Date: Mar 2010
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Also sorry for not including much info about the motor, all I know right now is that it's out of an older silverado, I will get much more details from my buddy tomorrow, thanks again.
