2001 Camaro V6 Build thread
#47
Launching!
Thread Starter
iTrader: (7)
Join Date: May 2011
Location: Ohio
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Got my new headlight on. The HID is more blue is the picture but I'll try them out and see how I like it. If I don't like it I'll probably order the good high end/ good ballast and bulbs and not the Ebay special lol. I still need to properly aim them but I'll do that when I actually plan on driving the car.
![](http://www.camaro5.com/forums/attachment.php?attachmentid=604573&stc=1&d=1393716940)
#48
Launching!
Thread Starter
iTrader: (7)
Join Date: May 2011
Location: Ohio
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
UPDATE:
Got my new hood. It's def going to get a paint job sometime. Also where is a good place to get the mesh thing that goes in the scoop part?
![](https://scontent-a-ord.xx.fbcdn.net/hphotos-ash3/t1.0-9/10154488_10203300581581440_1029826526_n.jpg)
![](https://scontent-a-ord.xx.fbcdn.net/hphotos-ash3/t1.0-9/10155262_10203300581821446_1253468607_n.jpg)
More Pics
![](https://scontent-b-ord.xx.fbcdn.net/hphotos-frc3/t1.0-9/1234298_10203300956710818_812909750_n.jpg)
![](https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn2/t1.0-9/1509257_10203300956310808_99981394_n.jpg)
![](https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-prn2/t1.0-9/10003899_10203300956350809_1823938392_n.jpg)
![](https://scontent-b-ord.xx.fbcdn.net/hphotos-frc1/t1.0-9/1962775_10203300958070852_50192042_n.jpg)
Now how can I get a new grille to fit it? I don't have any tabs or anything to secure it??
Got my new hood. It's def going to get a paint job sometime. Also where is a good place to get the mesh thing that goes in the scoop part?
![](https://scontent-a-ord.xx.fbcdn.net/hphotos-ash3/t1.0-9/10154488_10203300581581440_1029826526_n.jpg)
![](https://scontent-a-ord.xx.fbcdn.net/hphotos-ash3/t1.0-9/10155262_10203300581821446_1253468607_n.jpg)
More Pics
![](https://scontent-b-ord.xx.fbcdn.net/hphotos-frc3/t1.0-9/1234298_10203300956710818_812909750_n.jpg)
![](https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn2/t1.0-9/1509257_10203300956310808_99981394_n.jpg)
![](https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-prn2/t1.0-9/10003899_10203300956350809_1823938392_n.jpg)
![](https://scontent-b-ord.xx.fbcdn.net/hphotos-frc1/t1.0-9/1962775_10203300958070852_50192042_n.jpg)
Now how can I get a new grille to fit it? I don't have any tabs or anything to secure it??
#49
Launching!
Thread Starter
iTrader: (7)
Join Date: May 2011
Location: Ohio
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Just a little update. Sometime in the future I plan on buying a used ARH Cam for only the cost of shipping. Yes.... the cost of shipping. It had the keyway damaged on it and was professionally repaired and been fine for 3+ years. Only thing I'd need to replace are the springs to the 90# LS6 springs, retainers, rocker arm bolts and gaskets of course. This will probably be a winter project. I don't want to tear it down during the summer if I don't have to. One of the previous owners went a 13.7 with just the cam and a 3200 stall. Since I won't be putting a stall in it, I think it would run low 14s. What a big difference from low 15s lol. Here are some specs on the cam
ARH Naturally Aspirated cam
-210/220 @ .050
-.320" lobe lift on the intake, .512 with a 1.6 rocker ratio
-.320 lobe lift on the exhaust, .512 with a 1.6 rocker ratio
-112 lobe separation
ARH Naturally Aspirated cam
-210/220 @ .050
-.320" lobe lift on the intake, .512 with a 1.6 rocker ratio
-.320 lobe lift on the exhaust, .512 with a 1.6 rocker ratio
-112 lobe separation
#54
TECH Fanatic
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Have you ever gone to Camaro Fest in Michigan? It's over the July 4 weekend.
#59
Launching!
Thread Starter
iTrader: (7)
Join Date: May 2011
Location: Ohio
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I've been thinking about taking my silver hockey stripe off and doing something different. Maybe one of these stripes in the checkered style in black. Thoughts?
http://fourthcircledesigns.com/produ...products_id=39
http://fourthcircledesigns.com/produ...products_id=39