Slow Motion Swap Project
05-03-2014, 11:23 PM
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Jun 2012
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Slow Motion Swap Project What's up everyone? I've been hanging out for a while but I its time to share my project. A few months ago I picked up a 95 Z28 for $400. A guy from my Command was transferring and it wasn't running. I got it going but in the process I found a lot more rust under the can than I am willing to deal with. With that being the case I found a 96 V6 camaro with a blown motor for $700. The LT1 was rebuilt some 15K mile ago but it just was not running very well. So the tear down began. I have pulled the motor and the guy who had the car before me had had too much oil in it and had a boat load of blow by and gummed up the motor pretty good. So I'm cleaning that up and hope to start reassembling the LT1 next weekend. I picked up some mildly ported heads, LT4 hot cam, roller 1.6 rockers and some suspension parts. so between the two I should be able to build one nice ride.
