New Video of the 2JZ Camaro
#23
Plain and simple, the 2JZ is the best mass produced motor to come out of japan in terms of performance.
#24
Hey whats up everyone. Just wanted to update this thread with some new pics of the ride.
Also a nice article written by Race Industry.
http://www.raceindustry.com/newslett...newsletter.php
Hot Rod
So what will the next generation of hot rodders be? What's going to happen when the great metal artists dissapear? What happens when the children no longer know the history behind the deuce coupe and what it's brought to the industry? Who will be around to continue telling stories about the legendary tales of a Saturday night out on Woodward ave? Let's be realistic here, it is going to be very interesting to see what will and what won't survive 10-20 years from now.
I'm in that generation almost stuck in the middle, and I'm a unique case. My first car was a gift from my father at 14, it was a 1955 Chevy Suburban. I had grown up in a hot rod family, my dad had long been restoring old cars, and I grew up with the sound of a loud V8 in my ears. I remember the first Pomona Swap Meet when I through a fit because I had finally grown to big to go around in a stroller. When it came time to start working on my first car, we got out of hand. We moved away from our initial idea of putting a small block in it and being done. We started thinking we'd just chop it and throw in a motor, clean it up and it'd be my daily driver. Well we all know how that goes, 7 years later I was starting it for the first time.
So what did I do in the meantime? Well the cool cars on the road where no longer American Iron, but Imports, anything from inline fours, to straight sixes. The thought of something with 8 cylinders, blasphemy. Yes they were still there, but they weren't where I went; just like most of those around me. I had a little 6 cyl Acura with a little nitrous kit. It was a fun car, my friends knew nothing of what I was building on the side. While I'm back to the darkside (V8's are back in my daily life with my GTO) I still miss everything I learned from the import guys. I always wondered what it would like to be to cross the breads. Well, over the years it has been obvious both industries have been learning from each other. Bottom line, we are all in the same boat; we want horsepower, we want to look good, and we are all seeking the same smile that goes down when we are in that driver seat.
I present to you a creation that I just think was to cool to not share with others. This vehicle has brought a lot of discussion around; among my friends it's made people angry and others confused. The guys down in Texas at EVS motors have created a great mix of great American iron with a Japanese legend. A 1967 Camaro powered by a 900 HP Toyota Motor (I can't imagine what many of you are thinking, the comments I've read on various forums across the internet show a wide range of ideas). But let's not kid ourselves, what was the original mindset of the first true hot rodders? Work with what you can find. So why not take a two legends and create something truly unique and they have done it to perfection. They've brought together the beauty of the lines of one of the classic muscle cars and given it complete modern technology, and great influence. I can only hope that the next generation can do the same, create uniqueness that blends what's new with what's old to only expand on the legendary vehicles that have graced the lust of the next generation to move on to create their images of "Hot Rodding" perfection.
001
002
012
023
042
044
047
045
056
060
Also a nice article written by Race Industry.
http://www.raceindustry.com/newslett...newsletter.php
Hot Rod
So what will the next generation of hot rodders be? What's going to happen when the great metal artists dissapear? What happens when the children no longer know the history behind the deuce coupe and what it's brought to the industry? Who will be around to continue telling stories about the legendary tales of a Saturday night out on Woodward ave? Let's be realistic here, it is going to be very interesting to see what will and what won't survive 10-20 years from now.
I'm in that generation almost stuck in the middle, and I'm a unique case. My first car was a gift from my father at 14, it was a 1955 Chevy Suburban. I had grown up in a hot rod family, my dad had long been restoring old cars, and I grew up with the sound of a loud V8 in my ears. I remember the first Pomona Swap Meet when I through a fit because I had finally grown to big to go around in a stroller. When it came time to start working on my first car, we got out of hand. We moved away from our initial idea of putting a small block in it and being done. We started thinking we'd just chop it and throw in a motor, clean it up and it'd be my daily driver. Well we all know how that goes, 7 years later I was starting it for the first time.
So what did I do in the meantime? Well the cool cars on the road where no longer American Iron, but Imports, anything from inline fours, to straight sixes. The thought of something with 8 cylinders, blasphemy. Yes they were still there, but they weren't where I went; just like most of those around me. I had a little 6 cyl Acura with a little nitrous kit. It was a fun car, my friends knew nothing of what I was building on the side. While I'm back to the darkside (V8's are back in my daily life with my GTO) I still miss everything I learned from the import guys. I always wondered what it would like to be to cross the breads. Well, over the years it has been obvious both industries have been learning from each other. Bottom line, we are all in the same boat; we want horsepower, we want to look good, and we are all seeking the same smile that goes down when we are in that driver seat.
I present to you a creation that I just think was to cool to not share with others. This vehicle has brought a lot of discussion around; among my friends it's made people angry and others confused. The guys down in Texas at EVS motors have created a great mix of great American iron with a Japanese legend. A 1967 Camaro powered by a 900 HP Toyota Motor (I can't imagine what many of you are thinking, the comments I've read on various forums across the internet show a wide range of ideas). But let's not kid ourselves, what was the original mindset of the first true hot rodders? Work with what you can find. So why not take a two legends and create something truly unique and they have done it to perfection. They've brought together the beauty of the lines of one of the classic muscle cars and given it complete modern technology, and great influence. I can only hope that the next generation can do the same, create uniqueness that blends what's new with what's old to only expand on the legendary vehicles that have graced the lust of the next generation to move on to create their images of "Hot Rodding" perfection.
001
002
012
023
042
044
047
045
056
060
#32
i am not being a dick here or nething just giving my opinon but im scratching my head going why put a japan motor in an american car.....there is no substitution for cubic inches and definatly in an american made car
#33
1. Because we can... lol j/k
2. We have been in this business for awhile and we work on V8 projects all the time. Change is good and refreshes our outlook on things. Lets us think outside of the box. Other than doing a unique motor in this car we have learned to apply more modern technology to an old classic. For example other than Hydraulic Brake Boosting we have applied a modern Japanese ABS brake master cylinder to it. Nobody else in the world has done this either. We have also developed a driveshaft and transmission mount to install the world famous Getrag 6 Speed transmission, used in 911 Turbos and Supras, to a Camaro. We have developed a bracket system that reduces clutch pedal effort by 50% for race clutches!
3. Nobody in the world has done this and we are now the first.
4. A Hybrid is not a bad idea once you learn to appreciate it for what it is. Look at the Cobra before, a popular British car. Shelby took a hold of it and threw in a V8 and now it is one of the most expensive and sought after collector cars.
5. The owner wanted something nobody else has.
Its hard for most people and even us to accept the idea initially. Drastic change isn't easy for anyone to accept, but you will appreciate it once you understand it. I know the mentality is keep it American. Well we need to go tell GM and Ford that because a lot of cars are now not even American!! They are made in Mexico! lol Even our beloved 2010 Camaro, which I have ordered three, are made by the Canadians. So lets realize our American cars aren't even built by Americans now, and a lot of parts including a/c components are Japanese!
#38
Thanks everyone! Check out my other thread here. Car is putting down some serious numbers.
https://ls1tech.com/forums/chevrolet-camaro-1967-2002/1004112-red-beast-gets-dyno-ed-again-1-029bhp.html
https://ls1tech.com/forums/chevrolet-camaro-1967-2002/1004112-red-beast-gets-dyno-ed-again-1-029bhp.html
#40