5.3 carb going into a LT1
#1
5.3 carb going into a LT1
Alright so my LT1 went boom here a couple months ago. I was planning on rebuilding it, but a friend suggested just putting a carb'd 5.3 in it with heads and cam. He said by going carb'd i would eliminate the need for a wiring harness, and keep it simple. My question is, what all would i need as far as wiring and everything else i might need? I know this is really broad question, but i dont really know how to narrow it down. I'm newb to all this.
#2
11 Second Club
iTrader: (88)
There have been a ton of threads on this lately..
Click on the part in my Sig that says my Engine(the 402 LQ4/L92 part..), that will take you to my swap thread, there is a TON of info in it.
There have been may here that have used it.
Good luck, PM me if you need anything.
Click on the part in my Sig that says my Engine(the 402 LQ4/L92 part..), that will take you to my swap thread, there is a TON of info in it.
There have been may here that have used it.
Good luck, PM me if you need anything.