A few Chevelle parts
05-21-2009, 10:10 AM
#1
On The Tree
Thread Starter
iTrader: (9)
Join Date: Jan 2002
Location: Sac, CA
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
A few Chevelle parts I know we have alot of Chevelle people here, I'm getting rid of a few things so i thought this would be the best forum.
All prices are OBO and include shipping.
SPC arms, greaseable racing bushings. $280
C5 calipers, cleaned and painted with a high temp flat black paint. Has both mounting brackets. $120
Hubs that have been cleaned, turned down to fit the C5 rotors and all new bearings/races. ARP studs pressed in. Kore3 C5 caliper brackets for the stock GM short spindle, comes with everything needed to bolt them up including braided hoses. $175
New dimpled/slotted C5 rotors with ceramic brake pads, will check on where I ordered them from tomorrow. 2 rotors with front pads. $175
CPP Master cylinder with power booster, comes with the dist block that is setup for disc/disc. $175
64-67 trunk brace, RH side. $20
All prices are OBO and include shipping.
SPC arms, greaseable racing bushings. $280
C5 calipers, cleaned and painted with a high temp flat black paint. Has both mounting brackets. $120
Hubs that have been cleaned, turned down to fit the C5 rotors and all new bearings/races. ARP studs pressed in. Kore3 C5 caliper brackets for the stock GM short spindle, comes with everything needed to bolt them up including braided hoses. $175
New dimpled/slotted C5 rotors with ceramic brake pads, will check on where I ordered them from tomorrow. 2 rotors with front pads. $175
CPP Master cylinder with power booster, comes with the dist block that is setup for disc/disc. $175
64-67 trunk brace, RH side. $20
