Project "White Lightning"
#81
Well I kicked the *** out of the Starter and got back to work on it..I found two longer bolts, threaded them to M10x1.5, and put them in. There were enough threads left on the inner to grab it, the outer I had to put a nut on..
I dont **** around fellas..adapt, improvise, overcome.
Here is the Front Suspension all put back on..2" Drop Spindles in the front..
The Power Steering is tight..lol..
The Alternator will be going on the passengers side Head.. I had an extra Truck Idler Pulley and bolted it up. I'll make the Bracket soon, I'm using a Truck Alternator..
I dont **** around fellas..adapt, improvise, overcome.
Here is the Front Suspension all put back on..2" Drop Spindles in the front..
The Power Steering is tight..lol..
The Alternator will be going on the passengers side Head.. I had an extra Truck Idler Pulley and bolted it up. I'll make the Bracket soon, I'm using a Truck Alternator..
#82
TECH Addict
iTrader: (2)
Well I kicked the *** out of the Starter and got back to work on it..I found two longer bolts, threaded them to M10x1.5, and put them in. There were enough threads left on the inner to grab it, the outer I had to put a nut on..
I dont **** around fellas..adapt, improvise, overcome.
I dont **** around fellas..adapt, improvise, overcome.
These projects ain't gonna build themselves!
#90
Well after several hours of wiring that makes you want to bang your head through the wall..all the wiring is back in the truck and the Engine Bay is fully setup to run the LS1 Engine..
The Fuse Box and PCM Tray were mounted and all wires ran and integrated with the stock Truck Harness, aswell as all power wires are on the Junction Block on the Firewall so the Battery will supply everything necessary with 12v. The C-105 Connector coming out of the Fuse Box will plug into the Engine Harness and will supply all necessary power to run the Engine & Transmission.
The Fuse Box and PCM Tray were mounted and all wires ran and integrated with the stock Truck Harness, aswell as all power wires are on the Junction Block on the Firewall so the Battery will supply everything necessary with 12v. The C-105 Connector coming out of the Fuse Box will plug into the Engine Harness and will supply all necessary power to run the Engine & Transmission.
#93
^^Oh and see owners manual for the proper Oil and fill level for this LS1 S10..
Well I have to re-wire the whole PCM Harness from scratch..I bought it off of Ebay pretty cheap, it was a custom harness that some guy had built to 99-02 F-body specs. It's no where near that, lots of wires in the wrong places on the PCM connectors.
I sent a message to the guy asking who built it for him..this isnt the first time I've fixed "professional" work..
Well I have to re-wire the whole PCM Harness from scratch..I bought it off of Ebay pretty cheap, it was a custom harness that some guy had built to 99-02 F-body specs. It's no where near that, lots of wires in the wrong places on the PCM connectors.
I sent a message to the guy asking who built it for him..this isnt the first time I've fixed "professional" work..
#99
TECH Veteran
iTrader: (17)
Oh, im def a novice, never having wired anything more then a nitrous system and it took me a month to ballz up enough to do that.
Now i suddenly have to wire and entire car, lights and all, and dont even know where to start, LOL.
Its nerve racking and im scared, but whatever, ill figure it out
Good work man, ill be watching as you get her going.
Now i suddenly have to wire and entire car, lights and all, and dont even know where to start, LOL.
Its nerve racking and im scared, but whatever, ill figure it out
Good work man, ill be watching as you get her going.
#100
Teching In
Join Date: Oct 2009
Location: cabot arkansas
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Love the build man!! So when you get it on the road lets run'em for fun? Been out playing in my old pick up Oh your prob gonna want more stall, I got 2600rpm on mine right now... God i'm ready for my 3500!!