monte carlo trying to put lq4
09-26-2011, 12:05 AM
#1
Teching In
Thread Starter
Join Date: Sep 2011
Location: las vegas 702
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
monte carlo trying to put lq4 i have a 87 monte carlo i have a lq4 6.0 motor .i want to know i want do i need to get to put this motor in my monte carlo ... and i want to put the ls1 intake on it .. and wat serpatine can i use ... ? im new here...
09-26-2011, 01:48 AM
#2
TECH Enthusiast
iTrader: (2)
Join Date: Aug 2008
Location: Alberta, Canada
Posts: 617
Likes: 0
Received 0 Likes
on
0 Posts
Dude, you gotta do some reading on here. Lots of info out there if you look. Use the search and read the stickies.
https://ls1tech.com/forums/conversio...ap-guides.html
If you want to swap the LS1 intake for a PERFORMANCE gain, dont bother cuz it wont do you any good. If you want to do it for appearance, have at it. There are a few posts about how to do it and what you need on the performancetrucks page.
You can use whatever accessory drive you want really. F car works, but you will have to cut the frame for the a/c compressor if you want that. Truck acc works, and the alternator will fit under the hood as well as the fugly truck intake if you dont set the engine up too high.
G body swaps are so common now, there is tons info about them if you just look around a bit.
https://ls1tech.com/forums/conversio...ap-guides.html
If you want to swap the LS1 intake for a PERFORMANCE gain, dont bother cuz it wont do you any good. If you want to do it for appearance, have at it. There are a few posts about how to do it and what you need on the performancetrucks page.
You can use whatever accessory drive you want really. F car works, but you will have to cut the frame for the a/c compressor if you want that. Truck acc works, and the alternator will fit under the hood as well as the fugly truck intake if you dont set the engine up too high.
G body swaps are so common now, there is tons info about them if you just look around a bit.
