ls1 into 89 mustang
#1
Teching In
Thread Starter
Join Date: Jul 2011
Location: las vegas
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
ls1 into 89 mustang
Pretty much got all the peices layed out but I'm not quite sure how to wire this up to run. Anyone got any advice /webpage to walk me through this?
#2
TECH Regular
iTrader: (5)
Join Date: Feb 2010
Location: Celina, Texas
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
I used this guy, had lots of good info. http://www.lt1swap.com/ He has what you need for the LSx side of the harness. the Ford part is what sucks. You need to ask yourself if you want the OEM Ford gauges. If not, remove everything you dont need. There are a lot of wires in a fox Mustang.
#3
Teching In
Thread Starter
Join Date: Jul 2011
Location: las vegas
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Thanks man that should make it a lot eaiser for me. And I'm told I should take the cluster out of my wrecked camaro for an easier install and more accrute gauges. Did you have the 5 lug converison done? Does the front spindles of 94_95 mustang work on the aje k member?
#5
TECH Apprentice
iTrader: (3)
Join Date: Dec 2011
Location: Malvern, PA
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
Thanks man that should make it a lot eaiser for me. And I'm told I should take the cluster out of my wrecked camaro for an easier install and more accrute gauges. Did you have the 5 lug converison done? Does the front spindles of 94_95 mustang work on the aje k member?
#6
TECH Regular
iTrader: (5)
Join Date: Feb 2010
Location: Celina, Texas
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
I really Frankensteined mine. I got the AJE k-member, used the 93 control arms, replaced the ball joints with 94+ style, and replaced the control arm bushings with poly. I used the stock struts and put UPR coil overs on them.