5.3 6l80e swap need help
#1
Teching In
Thread Starter
Join Date: Feb 2012
Location: alabama
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
5.3 6l80e swap need help
I have 2010 5.3 dod deleted ,and a 2010 6l80e trans , which e38 ecm do I need ,or how can I get this combo to work ,I do have hp tuner pro but new to tunning got truck to run and drive ,trans has got a tune in it im not sure of ,the trans has 3600 stall and it is my dailey driver ,should i have gm load stock tune or work from this one
Last edited by race00; 09-10-2014 at 09:12 PM.
#2
Get the one from the vehicle that the 2010 6L80 came out of. Much easier to adapt the motor than the transmission to a new E38. Sounds like a 2010 truck. I would start with a 2010 truck that has a 5.3L motor and the 6L80 transmission and use the E38 from it.