snolan

I am looking to see if anyone in the Chicago area could plug my computer into their LS3 / 6L80 setup i can't seem to get my combo running before i have to trailer it to the tunner it runs then dies VATS has been checked this is my last try to figure this out.

Just want to see if this could be a computer problem.

If you could help please email me snolanc2@gmail.com

Steve

cpd004

iTrader: (13)

Steve...what ECM and pedal are you using?

Also, it sounds as though you might have the wire that needs to have constant 12v in crank AND run incorrect. Maybe double check that you have 12v + with ignition on and at crank. Just a thought.

snolan

I am using a LS3 ECM from a 2011 Camaro and a pedal from the same like to just see if this could be a bad computer ? i have done three LS swaps never had a issue before.

I will double Check my wires did check seemed to be right, i am using a BP automotive harness.

Steve

cpd004

iTrader: (13)

You're welcome to borrow an 11 Corvette E38 that is known to work if you feel like coming to grab it. I just need it back by the 21st as I have it for sale. I'm near 13000 S Torrence Chicago.

snolan

Cpd004, Love to do that could you send me your Mobile / Phone i will call you or if you like call me 630-257-3609 my home # not that far away i live in Lemont.

My mobile # 630-272-9867

Steve