chevelle throttle pedal??

Reply Subscribe

Thread Tools

Search this Thread

Dec 11, 2015 | 07:19 AM

Seeker1056

Thread Starter

On The Tree

Joined: May 2012

Posts: 133

Likes: 1

chevelle throttle pedal??

I have not seen anywhere in the forums where it speaks to what people are using for throttle pedals for the LS conversion in the Chevelle or A-body platform so they can switch from mechanical rod type linage to a cable throttle for the LS engines

Pics would be helpful especially if you are fabricating the pedal

thanks
Ken

Dec 11, 2015 | 08:09 AM

70ssclone

Launching!

Joined: Jun 2013

Posts: 223

Likes: 1

Ken,

You can use your factory pedal the rod just needs to be bent a bit to achieve WOT. You can use a lokar LS swap cable or I just pulled one from an s10 blazer at the scrap yard

Hope this helps
Josh

Dec 11, 2015 | 08:11 AM

Seeker1056

Thread Starter

On The Tree

Joined: May 2012

Posts: 133

Likes: 1

would you have a pic of your cable setup where it attaches to the pedal arm?
thanks

Dec 11, 2015 | 08:51 AM

Haddixj

On The Tree

iTrader: (1)

Joined: Aug 2011

Posts: 145

Likes: 0

From: Sacramento ca

I have also read you can use a camaro 1967 or so gas pedal from a 6cyl that is a cable pedal. That is what I am planning so far.

Dec 11, 2015 | 08:52 AM

1964SS

TECH Fanatic

iTrader: (1)

Joined: Aug 2012

Posts: 1,539

Likes: 84

From: Mesa, Arizona

I used the Lokar pedal designed for early A body swaps. It bolts to the same place as the original pedal and is adjustable.

This is for the 64-67
http://www.lokar.com/product-pgs/dir...le-pedals.html