Motor mount questions HELP
01-17-2017, 06:33 AM
#1
Teching In
Thread Starter
Join Date: Jan 2017
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Motor mount questions HELP 
I have an 1984 cutlass swapping a 5.3 LS Engine into it purchased LSX innovations non adjustable plates and moroso solid mounts currently not lining up engine is dropping to low am bolted to th350 though and crossmember anyone have any experience with this its a budget build for my shop other than making a steel plate top space engine up and relocate holes at a loss figured id throw a thread up to see if anyone has ideas or has seen this problem before \
Thanks in advance!!
01-17-2017, 07:53 AM
#2
Restricted User
What do you mean by 'too low'?
Is the pan hitting the frame? Is the pan hanging too far?
And what do you mean by mounts not lining up? Are they down too low, up too high, too far forward?
Is the pan hitting the frame? Is the pan hanging too far?
And what do you mean by mounts not lining up? Are they down too low, up too high, too far forward?
01-17-2017, 06:16 PM
#3
Teching In
Thread Starter
Join Date: Jan 2017
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Response Frame mount pad is to high clamshell is to low and at right height they do not line up .. pan it's center link when all the way down and very close to cross member adding pics twice but admin must not of approved them yet