1978 Camaro 6.0/4l80E Paddleshift, Turbo Build
#1
TECH Enthusiast
Thread Starter
iTrader: (2)
Join Date: Jan 2009
Posts: 621
Likes: 0
Received 0 Likes
on
0 Posts
1978 Camaro 6.0/4l80E Paddleshift, Turbo Build
Guess its about time to post some progress on the old camaro build. got this Camaro about 6 Months ago it had a healthy 355 in it, drove it home 4 hrs with 4.11 gears and a 3 speed auto which was interestingly loud and annoying. pull it in the garage and immediately began pulling the engine out. found a 6.0 and 4l80e pretty cheap in nashville. reworked it to look like an old school engine. Also used my Home built CNC router to cut out a paddle shifter that im still in the process of messing with. pretty happy how clean it turned out. Running the Holley Dominator EFI on it right now, pretty much all holley parts, pan, mounts intake, TB, Stainless headers, valve covers, except trans mount cause they dont make one for a 80e. but now comes the fun part. about to start adding the power and possibly going turbo.
https://drive.google.com/file/d/1f-6...ew?usp=sharing
https://drive.google.com/file/d/1GQl...ew?usp=sharing
https://drive.google.com/file/d/1Fgf...ew?usp=sharing
https://drive.google.com/file/d/1FME...ew?usp=sharing
https://drive.google.com/file/d/14q1...ew?usp=sharing
https://drive.google.com/file/d/1Vva...ew?usp=sharing
https://drive.google.com/file/d/1f-6...ew?usp=sharing
https://drive.google.com/file/d/1GQl...ew?usp=sharing
https://drive.google.com/file/d/1Fgf...ew?usp=sharing
https://drive.google.com/file/d/1FME...ew?usp=sharing
https://drive.google.com/file/d/14q1...ew?usp=sharing
https://drive.google.com/file/d/1Vva...ew?usp=sharing
Last edited by RNation0001; 12-23-2017 at 07:05 AM.
#2
TECH Senior Member
Cool ride! I'll be watchin'!