Ls2-4l80e Chevelle **UPDATED WITH PICS**
#81
TECH Enthusiast
Thread Starter
the ac, i believe i have it worked out with the placement,the hardest part was tracking down a piece of D O M tubing - to sleeve the bolt ( between the compressor mounts ) and to weld to flat steel that will bolt to the block.then ill fab another piece for the idler pulleys.i plan on placing the pulleys so i could use the stock non-ac belt if needed in an emergency or needed not to have the ac for some reason. john
#82
John what color are you going to paint the car? Just curious sense my 65 cutlass has the same(hope I don't offend U) ugly gold paint as yours. It just don't do it for me. There are so many choices I just can't make up my mind. I'm leaning towards 2005 mustang mineral gray. I sure like candy apple red but just don't want that much bling on my ride.
#83
TECH Enthusiast
Thread Starter
actually i thought about keeping it gold, for about a second.im going black all the way and maybe a custom color in the interior like saddle or a pearl, still a bit aways on the int. but it will be black .i would keep the paint a stock color.just my likes though. JOHN
#84
What is the current status on the car? Haven't seen you post anything for a while.
#86
TECH Enthusiast
Thread Starter
the current status, at the body shop the rear panel. complete trunk & trunk extentions and passenger lower quarter have been changed so far. firewall has been smoothed out as well.waiting on the front floors,front lower cowl sections and a patch for the drivers side quarter just ordered an afco aluninum radiator and fan. slowly working on my compressor relocation brackets and looking for a pair of doner doors no pics right now my computer is on the fritz . JOHN
#87
TECH Enthusiast
Thread Starter
s/ee1/JE6670/car007.jpg[/IMG]ucket.com/albums/ee1/JE6670/car007.jpg[/IMG][IMG]http://i228.photobucket.com/albums/ee1/JE6670/car007.jpg[/IMG]om/albums/ee1/JE6670/car007.jpg[/IMG]
Last edited by john 67; 07-30-2008 at 08:19 PM. Reason: mistake
#95
TECH Enthusiast
Thread Starter
just a few unorganized pics of my compressor rough mock-up .got a new computer and im trying to figure out the pic thing. still have too mount the idler pulleys and get a belt and trim up the brackets a bit but it looks like it will work . car is still in body shop. JOHN