1967 Camaro with Katech Street Attack 427
#61
Launching!
Thread Starter
Join Date: Jan 2006
Location: Calgary, AB
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
Well we are getting closer to having paint on the car -
Seam sealer was the last major hurdle to get through before painting the underside and interior
Seam sealer was the last major hurdle to get through before painting the underside and interior
#69
Launching!
Thread Starter
Join Date: Jan 2006
Location: Calgary, AB
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
And the underside:
Masked and ready for paint:
In the booth:
We used a thinned rock gaurd on the underside which is why there is some texture there. In person it is very subtle but in pictures it seems to catch the light and look more obvious than it is.
Masked and ready for paint:
In the booth:
We used a thinned rock gaurd on the underside which is why there is some texture there. In person it is very subtle but in pictures it seems to catch the light and look more obvious than it is.
Last edited by reboot04; 04-13-2008 at 03:45 PM.
#75
Launching!
Thread Starter
Join Date: Jan 2006
Location: Calgary, AB
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
While we are working on some details on the body I started plumbing the oil system on the LS7 over the weekend:
The remote oil filter
Oil cooler thermostat:
and the oil cooler itself:
The remote oil filter
Oil cooler thermostat:
and the oil cooler itself: