One more up and running. 71 Corvette 6.0 L92 with sheet metal intake. Pics
#43
TECH Junkie
iTrader: (10)
i cant find the wagner site to save my life.
they are billet pieces, black anodized, that bolt to the stock steam hole location with a nice stainless allen screw. it even recesses in the fitting. then off to the side has pipe threads to run a pipe fitting from there.
its o ringed, and even has the nipple to locate it on the head.
they are about 5/8" thick, and about the shape of an advil liquid gel.
i dont have them here, or i would take a pic. they are at my shop.
stood up a lil too high for my tastes. but my tastes are strange. id sell them resonablly if anyone wanted them. 10+ ship for the pair. i think they were 15 each new.
here is what i run now. best pic i have. head tapped 1/8", with 1/8x-4an 90 adapter fittings.
they are billet pieces, black anodized, that bolt to the stock steam hole location with a nice stainless allen screw. it even recesses in the fitting. then off to the side has pipe threads to run a pipe fitting from there.
its o ringed, and even has the nipple to locate it on the head.
they are about 5/8" thick, and about the shape of an advil liquid gel.
i dont have them here, or i would take a pic. they are at my shop.
stood up a lil too high for my tastes. but my tastes are strange. id sell them resonablly if anyone wanted them. 10+ ship for the pair. i think they were 15 each new.
here is what i run now. best pic i have. head tapped 1/8", with 1/8x-4an 90 adapter fittings.
#44
TECH Junkie
iTrader: (18)
i cant find the wagner site to save my life.
they are billet pieces, black anodized, that bolt to the stock steam hole location with a nice stainless allen screw. it even recesses in the fitting. then off to the side has pipe threads to run a pipe fitting from there.
its o ringed, and even has the nipple to locate it on the head.
they are about 5/8" thick, and about the shape of an advil liquid gel.
i dont have them here, or i would take a pic. they are at my shop.
stood up a lil too high for my tastes. but my tastes are strange. id sell them resonablly if anyone wanted them. 10+ ship for the pair. i think they were 15 each new.
here is what i run now. best pic i have. head tapped 1/8", with 1/8x-4an 90 adapter fittings.
they are billet pieces, black anodized, that bolt to the stock steam hole location with a nice stainless allen screw. it even recesses in the fitting. then off to the side has pipe threads to run a pipe fitting from there.
its o ringed, and even has the nipple to locate it on the head.
they are about 5/8" thick, and about the shape of an advil liquid gel.
i dont have them here, or i would take a pic. they are at my shop.
stood up a lil too high for my tastes. but my tastes are strange. id sell them resonablly if anyone wanted them. 10+ ship for the pair. i think they were 15 each new.
here is what i run now. best pic i have. head tapped 1/8", with 1/8x-4an 90 adapter fittings.
You're spelling it wrong is why you can't find it. It's Wegner. Here are the pieces you are talking about.
http://s41657.sites80.storefront-hos...l.aspx?ID=3289
#46
TECH Junkie
iTrader: (10)
You're spelling it wrong is why you can't find it. It's Wegner. Here are the pieces you are talking about.
http://s41657.sites80.storefront-hos...l.aspx?ID=3289
http://s41657.sites80.storefront-hos...l.aspx?ID=3289
no since in selling the ones i have. keep um for a rainy day.
thanks for the link! spelling owns me.
#48
Launching!
Thread Starter
iTrader: (6)
Join Date: Jan 2005
Location: Hamilton, MI
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
i cant find the wagner site to save my life.
they are billet pieces, black anodized, that bolt to the stock steam hole location with a nice stainless allen screw. it even recesses in the fitting. then off to the side has pipe threads to run a pipe fitting from there.
its o ringed, and even has the nipple to locate it on the head.
they are about 5/8" thick, and about the shape of an advil liquid gel.
i dont have them here, or i would take a pic. they are at my shop.
stood up a lil too high for my tastes. but my tastes are strange. id sell them resonablly if anyone wanted them. 10+ ship for the pair. i think they were 15 each new.
here is what i run now. best pic i have. head tapped 1/8", with 1/8x-4an 90 adapter fittings.
they are billet pieces, black anodized, that bolt to the stock steam hole location with a nice stainless allen screw. it even recesses in the fitting. then off to the side has pipe threads to run a pipe fitting from there.
its o ringed, and even has the nipple to locate it on the head.
they are about 5/8" thick, and about the shape of an advil liquid gel.
i dont have them here, or i would take a pic. they are at my shop.
stood up a lil too high for my tastes. but my tastes are strange. id sell them resonablly if anyone wanted them. 10+ ship for the pair. i think they were 15 each new.
here is what i run now. best pic i have. head tapped 1/8", with 1/8x-4an 90 adapter fittings.
I saw the website with those fittings but I was getting towards the end of the winter and sick of spending money.
Thanks! It's interesting to see the crossover between forums. Do you have any pictures of your project?
#49
Launching!
iTrader: (13)
Join Date: Jun 2005
Location: absecon,new jersey
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
That's what I should have done, it looks very clean that way. The heads were already bolted on when I got to that part.
I saw the website with those fittings but I was getting towards the end of the winter and sick of spending money.
Thanks! It's interesting to see the crossover between forums. Do you have any pictures of your project?
I saw the website with those fittings but I was getting towards the end of the winter and sick of spending money.
Thanks! It's interesting to see the crossover between forums. Do you have any pictures of your project?
Well actually ive been done and running for a few years now,but just recently took it back down to the frame for a total rebuild.New fuel system,detailing,replacing,new cam,head work etc..........Ill have the rolling chassis back on the ground tonight then the body starts,L88 hood being added,new paint scheme.My new garage is being started today so when that s done ill work on the body.
http://rides.webshots.com/photo/2552...52841409CTHJhJ
http://rides.webshots.com/photo/2277...52841409WNISFR
#51
11 Second Club
iTrader: (32)
Join Date: Jan 2006
Location: Southaven, MS (near Memphis, TN)
Posts: 3,701
Likes: 0
Received 2 Likes
on
2 Posts
The car looks awesome! You did a great job...but I'm sorry to say...my favorite part was the vice grips door handle
http://i31.tinypic.com/pqds8.jpg
http://i31.tinypic.com/pqds8.jpg
#52
TECH Regular
iTrader: (2)
Join Date: Oct 2004
Location: Struble, IA
Posts: 443
Likes: 0
Received 0 Likes
on
0 Posts
The car looks awesome! You did a great job...but I'm sorry to say...my favorite part was the vice grips door handle
http://i31.tinypic.com/pqds8.jpg
http://i31.tinypic.com/pqds8.jpg
HA! I didn't even notice that.
#53
Launching!
Thread Starter
iTrader: (6)
Join Date: Jan 2005
Location: Hamilton, MI
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, the vice grip door handle was a big hit. Everybody wanted one.
I've been driving the car all summer and put at least 5k miles on it already. We went out to CO with it for two weeks too. Here it is at 10,000 feet
I've been driving the car all summer and put at least 5k miles on it already. We went out to CO with it for two weeks too. Here it is at 10,000 feet
#56
TECH Addict
iTrader: (1)
I came across your thread digging around for info on L92 valves. I know this is a few years old now, but I gotta say you pulled off a very nice intake manifold. Did you machine the flanges yourself? Are the runners bent and welded sheet? Did you do any design calculations on plenum volume, runner length/volume, etc?
Nice work. The car looks great!
Nice work. The car looks great!