Carshop Inc motor plates
#21
Here are a couple of pics of mine with this setup. Fits perfect.
Hooker plates(someone should make a machined replica!)
energy suspension mounts ens-3-1118g(summit) With this set up make sure you use the backing plates. Will not fit unless you use them.
frame mount E291(short small block)classic industries
pitman arm rp20138(rare parts)
idler arm rp20227(rare parts)
stock center link
short steering arms-very important and somewhat hard to come by
Hooker LS1 conversion headers bought from Jet Hot
Corvette front accesories minus A/C
Turbo 400 transmission crossmember(May or may not work for your application
F body pan unmodified
Hooker plates(someone should make a machined replica!)
energy suspension mounts ens-3-1118g(summit) With this set up make sure you use the backing plates. Will not fit unless you use them.
frame mount E291(short small block)classic industries
pitman arm rp20138(rare parts)
idler arm rp20227(rare parts)
stock center link
short steering arms-very important and somewhat hard to come by
Hooker LS1 conversion headers bought from Jet Hot
Corvette front accesories minus A/C
Turbo 400 transmission crossmember(May or may not work for your application
F body pan unmodified