homebuild bellhousing ?
#1
Launching!
Thread Starter
iTrader: (3)
Join Date: Oct 2006
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
homebuild bellhousing ?
I'm looking for some examples from installing a gearbox behind a ls1 that needs a homebuild bellhousing ?
or using a stock t5 bellhousing with an adaptor plate to fit a different gearbox
thanks, Jeejee
or using a stock t5 bellhousing with an adaptor plate to fit a different gearbox
thanks, Jeejee
#2
TECH Enthusiast
iTrader: (3)
Nearly any combination should be able to be done with correct spacing and alignment.
A local guy I know made a T10 aluminum bell housing bolt up to a LS1 T56. He's an old hot rodder with some mad fabricating skills. he simply made a plate that went between the t56 and the bell housing. he now uses a clutch fork with manual linkage behind a SBC.
it can be done, just depends on skills/money/tools.
A local guy I know made a T10 aluminum bell housing bolt up to a LS1 T56. He's an old hot rodder with some mad fabricating skills. he simply made a plate that went between the t56 and the bell housing. he now uses a clutch fork with manual linkage behind a SBC.
it can be done, just depends on skills/money/tools.