6.90's in a junkyard 6.0
#25
TECH Enthusiast
iTrader: (1)
Join Date: May 2005
Location: central florida
Posts: 572
Likes: 0
Received 0 Likes
on
0 Posts
But I have AFR heads at 62 cc, Vic Jr carb intake, DP Holley... 3500 stall and 3.36 highway gears (will upgrade to 3.73 when they brake) my car last time I weighed it was 3150 w/o me and 1/4 tank of gas. I am doing some weigh reduction now.
Hopefully will be done with the next week or 2.
#30
TECH Fanatic
iTrader: (24)
I have a 6.0L with mild ported L92's and a 242/246 cam. just got it off the engine dyno and it made 575 with a edelbrock ultra low elbow and a 90mm throttle body. stock bottom end with valve reliefs and arp rod bolts. unported GMPP l92 intake. motor pulls to 7800....
just giving you some idea's on some l92 heads.
just giving you some idea's on some l92 heads.
#34
TECH Enthusiast
Thread Starter
iTrader: (6)
Join Date: Aug 2008
Location: DAVIDSON NC
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
what kind of carbed intake options do you have with L92 heads?i'm going to try it in the qtr hopefully this weekend,i took 50llbs out of it and set my pinion angle and put a mezeire race electric pump on it....hope i can knock another tenth off.my goal was 6.70's anyway.the car cut mid 1.40 short times with 2 degree's positive angle,so i'm hoping my short time will pick up with the angle set right now(started with 2 degree's negative)might end up with 4 degree's.took 50llbs out of the doors(crash bar's)and the electric pump picked up 13 rwhp.so i'm hoping for that tenth...
Last edited by billyflantos; 04-07-2009 at 05:47 PM.
#39
TECH Enthusiast
iTrader: (1)
Join Date: May 2005
Location: central florida
Posts: 572
Likes: 0
Received 0 Likes
on
0 Posts
I have a 6.0L with mild ported L92's and a 242/246 cam. just got it off the engine dyno and it made 575 with a edelbrock ultra low elbow and a 90mm throttle body. stock bottom end with valve reliefs and arp rod bolts. unported GMPP l92 intake. motor pulls to 7800....
just giving you some idea's on some l92 heads.
just giving you some idea's on some l92 heads.
#40
TECH Apprentice
Join Date: Oct 2007
Location: Granada Hills, Ca
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
what kind of carbed intake options do you have with L92 heads?i'm going to try it in the qtr hopefully this weekend,i took 50llbs out of it and set my pinion angle and put a mezeire race electric pump on it....hope i can knock another tenth off.my goal was 6.70's anyway.the car cut mid 1.40 short times with 2 degree's positive angle,so i'm hoping my short time will pick up with the angle set right now(started with 2 degree's negative)might end up with 4 degree's.took 50llbs out of the doors(crash bar's)and the electric pump picked up 13 rwhp.so i'm hoping for that tenth...