NEWEDGE-LS1

Can anyone give me some advice or send me some links on this swap. I have a 1999 WS-6, 6 speed it was in a wreck can't be fixed. A friend of mines gave me a 2000 mustang auto v6 blown motor; I was thinking dropping the ls1 in there. Need some help please? Which k member to use and wire harness, rear end and drive-shaft... I looked cant find anything on this, I saw one guy on you tube did it... If anyone can please help.

Phil99vette

iTrader: (11)

Interesting...

NEWEDGE-LS1

Don't like my project?? you could of said you did it before. I just looked at your post thanks. Nice mustang.. BUTT I DONT WANT TO GO THAT CRAZY WITH IT.

Phil99vette

iTrader: (11)

AJE makes a LS1 - 99-04 mustang K-member

NEWEDGE-LS1

I guess i'll start there. You ran a 7.5 @191 thats a big *** turbo.

Phil99vette

iTrader: (11)

Thanks, also I would use the factory 8.8" rear with a pinion support, big ford ends, and axle tube braces. Driveshaft aluminum unless you want to make serious power with the correct yoke for your transmission.

feldz82

iTrader: (6)

I bought a qa1 4.6 k member with a arms for $175 off ebay, modified som 4.6 mounts with some adapter plates and came up with this



mines a '95 tho but should be the same.