Need 66 Corvette LS1 T56 install info
#1
Launching!
Thread Starter
iTrader: (1)
Join Date: Aug 2007
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I just finished my LS1 T56 install in my 69 Camaro so I know all of the small things..
Need to know what to use for a 1966 Corvette install..
What:
-Motor mounts and plates
-Tranny crossmember
-Radiator
-Accesory set up alternator PS pump and such..(F-Body, Vette or other)
-Clutch master cylinder mount
Thanks
Need to know what to use for a 1966 Corvette install..
What:
-Motor mounts and plates
-Tranny crossmember
-Radiator
-Accesory set up alternator PS pump and such..(F-Body, Vette or other)
-Clutch master cylinder mount
Thanks
#2
TECH Junkie
iTrader: (1)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
There are quite a few that have done C3s. Even some of the few C2 swap guys are posting on the corvetteforum C3 page. Check out the stickys at the top of the tech page.
I just finished my LS1 T56 install in my 69 Camaro so I know all of the small things..
Need to know what to use for a 1966 Corvette install..
What:
-Motor mounts and plates
-Tranny crossmember
-Radiator
-Accesory set up alternator PS pump and such..(F-Body, Vette or other)
-Clutch master cylinder mount
Thanks
Need to know what to use for a 1966 Corvette install..
What:
-Motor mounts and plates
-Tranny crossmember
-Radiator
-Accesory set up alternator PS pump and such..(F-Body, Vette or other)
-Clutch master cylinder mount
Thanks
1966, 66, c2, c3, conversion, corvette, crossmember, engine, installation, ls1, mid, mounts, swap, t56, transmission, year