How are the Holley pumps? 
Inline fuel pumps
Thread Starter
TECH Apprentice
iTrader: (7)
Joined: Mar 2005
Posts: 358
Likes: 0
From: Rancho Cucamonga, Ca
Inline fuel pumps Just curious what inline pumps most of you are using on your conversions. My last conversion I used the Aeromotive A1000 pump, but this time I think that pump is way overkill for a 5.3 with a cam only truck engine. What are some of the fuel set ups you guys are using?
Ill be ordering a walbro 255 for mine with a corvette filter and regulator. Pump is about $120, filter and regulator is like $40. Im running 3/8" hard line with a 5/16" return line and i'll be using all brass compression fittings.
11 Second Club
iTrader: (27)
Joined: May 2005
Posts: 6,799
Likes: 5
From: Your girl's back door giving her the long stroke while you're at work
I took the intank pump out and I'm using a Holley Black electric pump. I've also got two Holley regulators; one for the motor side and one for the nitrous side.
The Holley Black is noisy too
The Holley Black is noisy too
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo I have a Weldon that I used on my injected motor. It's real quite and after some research, I find that it can also be used for a carbed engine. It can be regulated down to the correct pressure. I will be switching to it shortly. If you watch the video I posted, you can hear the Mallory pump come on just before the car starts.
I have a Weldon that I used on my injected motor. It's real quite and after some research, I find that it can also be used for a carbed engine. It can be regulated down to the correct pressure. I will be switching to it shortly. If you watch the video I posted, you can hear the Mallory pump come on just before the car starts.
