water temp sender

Reply Subscribe

Thread Tools

Search this Thread

Jun 30, 2009 | 11:14 PM

markarleta1

Thread Starter

Staging Lane

Joined: Sep 2007

Posts: 75

Likes: 0

water temp sender

im having trouble trying to get a adapter from 12mm to 1/8"mpt so i can get my temp sender in my cyl. head. does any one have a fix?

Jun 30, 2009 | 11:20 PM

fatelvis7

Teching In

iTrader: (1)

Joined: Aug 2007

Posts: 7

Likes: 0

temp sender

drill it out and tap it for the new thread, very easy, very quick, get a tap at local hardware store, use recommended drill and dip it in grease to catch the shavings. I've done it on 2 cars .

Jul 1, 2009 | 12:39 AM

70 LS1

Conversion master

iTrader: (1)

Joined: Dec 2001

Posts: 861

Likes: 1

From: Gig Harbor, Wa

You can't drill the cylinder head for 1/8 NPT because 12mm is bigger than 1/8 NPT, but the factory 12mm plug in the head can be drilled and tapped.

Jul 1, 2009 | 06:07 AM

Pop N Wood

TECH Junkie

iTrader: (1)

Joined: May 2006

Posts: 3,402

Likes: 8

Several places make adapters. Equus, Sun Pro, I think autometer.

Look through some old posts.

Jul 2, 2009 | 06:29 AM

smokin2002

Launching!

iTrader: (10)

Joined: Mar 2005

Posts: 270

Likes: 0

ive also seen the water pump drilled and taped on the top flat round spot.. may be the road i take, lil leary of drilling on brand new prc heads of mine and hoping they dont weep afterward,