Big primary long tube headers for 2nd Gen FBody?
#1
9 Second Club
Thread Starter
iTrader: (2)
Join Date: Jul 2002
Location: on the dyno tuning in MD
Posts: 2,583
Likes: 0
Received 1 Like
on
1 Post
Big primary long tube headers for 2nd Gen FBody?
Searching through some of the threads in here, it looks like alot of people are using the small primary long tubes or shorties for their swaps...
I am going to be doing a large cube nitrous engine for my 80 Camaro and want to run a 2" primary long tube. The only one I can find is the BRP setup with their mounts and the caddy pan... prices are kinda steep for the mounts! The header prices actually aren't bad. And I can get the pan local.
Anyone using the BRP headers with a different mount? Are there any other large primary headers out there?
I am going to be doing a large cube nitrous engine for my 80 Camaro and want to run a 2" primary long tube. The only one I can find is the BRP setup with their mounts and the caddy pan... prices are kinda steep for the mounts! The header prices actually aren't bad. And I can get the pan local.
Anyone using the BRP headers with a different mount? Are there any other large primary headers out there?