1937 Ford LS2 Install
#541
Update......I bought a Blue faced cluster that matches the car a lot better and while Eric had the unit he reset the mileage to match what I had on the car........"And"......the Gauge Cluster after Eric's efforts has all the faults gone, and functions exactly as a stock GTO would........"All" factory functions work as per stock...........I can't say enough about Eric's dedication and efforts to get this nagging problem resolved.........
What all did you end up having to add to get all the faults cleared and everything working ?
#542
TECH Fanatic
Thread Starter
Well.............It was a Test of Will power and asking enough questions of people who are a lot smarter than I am.........and a lot of time piecing together bits and pieces of a complex system that was designed to work with all systems in place.....we only used parts of the modules as required to get the information the Cluster was looking for to be functional......including the fuel pump assy for the fuel gauge to work......Dark.....I know you are using a 09 Corvette cluster so I'm sure it will be different than my GTO set-up, so I guess you will be going thru the same learning curve that I went thru.....Good Luck!!!
Also ,.......Like the thread explains, the final piece of the puzzle was supplied by Eric (Phantom GTO) ....who was able to eliminate the ABS fault.......Again Good Luck......
#546
TECH Fanatic
Thread Starter
Along with a small module developed by a member here to clear the ABS and other faults......Contact Eric at americs01@gmail.com
Ken
#547
TECH Fanatic
Thread Starter
O.K........Starting to cool off around here and I guess I will be taking the dash out to get the final Mini-Module that Eric made and supplied to satisfy the computers demands for information to eliminate the ABS fault......Here are a couple of Pic's of what Eric made........So.....If you are considering this GTO cluster in your swap........Eric is the "MAN"
#549
TECH Fanatic
Thread Starter
So.....After finishing the Impala the 37 just sat in the garage ..........Sold it and it is now down in Texas..............
Ken
Ken
#550
TECH Resident
iTrader: (1)
#551
Is anybody still in contact with Eric/06phantom? Im trying to sort out my 06 GTO harness and cluster and could really use the module he made! Ive tried his email already, but no response yet... Any help would be greatly appreciated!