Corvette Fuel Filter, Russell fitting 640940
Thread Starter
TECH Enthusiast
iTrader: (3)
Joined: Jun 2008
Posts: 662
Likes: 2
From: Aransas Pass, TX
Corvette Fuel Filter, Russell fitting 640940 Does anyone have a picture of the russell fitting 640940.
I think its what I need for my corvette fuel filter.
I'm trying to make the output side go directly to an AN fitting.
I can't find a picture of this fitting anywhere.
I think its what I need for my corvette fuel filter.
I'm trying to make the output side go directly to an AN fitting.
I can't find a picture of this fitting anywhere.
That part number is for a zinc fitting, do you want the red and blue maybe/
See link...
http://www.russellperformance.com/mc...fit/fuel.shtml
See link...
http://www.russellperformance.com/mc...fit/fuel.shtml
Thread Starter
TECH Enthusiast
iTrader: (3)
Joined: Jun 2008
Posts: 662
Likes: 2
From: Aransas Pass, TX
"Fitting -6 AN Male to 3/8" Push-on EFI"
That is the part description, but still no idea what it looks like.
Don't know what you mean by a zinc fitting, but if you mean it looks like all the other an fiting then yea, thats what i want.
That is the part description, but still no idea what it looks like.
Don't know what you mean by a zinc fitting, but if you mean it looks like all the other an fiting then yea, thats what i want.
For the output side of the VETTE FPR.. you would need to use a short peice of 3/8" tubing with the correct QD barb on it, Doman sells a short peice or find a short donner peice. Then you would need a Compression to AN adapter for the 3/8" tube.
Chech the FAQ.. as it should how many have used the Vette FPR and adapters to AN fittings.
You can use the 640930 and 640940 on the inlet and return ports.
Chech the FAQ.. as it should how many have used the Vette FPR and adapters to AN fittings.
You can use the 640930 and 640940 on the inlet and return ports.
See the link, page 6 post # 106, it's the second picture, that one is 5/16" I believe, but the 3/8" looks just like this.....
https://ls1tech.com/forums/conversio...ap-faqs-6.html
T,
vette fpr with all 3 russell AN fittings (in/out/return). here's a link to russell's 2009 catalog. see lower right corner, there's a picture of it. and here's a better picture courtesy of pirate4x4.
Last edited by hookemdevils22; Aug 15, 2009 at 10:44 AM.
Trending Topics
Thread Starter
TECH Enthusiast
iTrader: (3)
Joined: Jun 2008
Posts: 662
Likes: 2
From: Aransas Pass, TX
vette fpr with all 3 russell AN fittings (in/out/return). here's a link to russell's 2009 catalog. see lower right corner, there's a picture of it. and here's a better picture courtesy of pirate4x4.
So that is the fitting i'll need.
Thanks alot.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
