G'D_UPLQ4

I want to put a digital dash in my cutlass with an lq4 swap and msd box i figured it'll be a lil bit different installing the digital dash...



i need some help fellas chime in thanks

ssduane

iTrader: (3)

I have one in my 66 nova, LS1 swap, works great, what are your questions?

All functions of mine work, shift indicator, engine light etc......

G'D_UPLQ4

would i hookit up the same way as if it were a factory motor in it and is there anything else needed besides the dash itself..

ssduane

iTrader: (3)

hook up is simple either way, trans speed single is a simple wire up, oil pressure comes from the engine only, water emp comes from a sensor that you can put in the other head, opposite of the PCM sensor. One signal from the PCM to the engine problem dash hookup. Dakota will send you a LS kit with the dash for sensors and adaptors etc.... Just tell them what engine your using and the kit comes with it.

Download the manual on their site, the thing is easy to hook up. They even offer a trans that you can hook up to your shifter to give the gear indication on the dash.