getting parts together for 69 camaro, LS1 swap
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Jan 2007
Location: CT
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
getting parts together for 69 camaro, LS1 swap
Hi guys,
I first wanted to say that you have a great site here! My head is spinning from all the information. Could you guys check out the parts Im planning on ordering soon to see if I these parts are mismatched? I want to use my stock steering.
GTO Ls1 and 4L60 trans.
Edelbrock long tube headers and mounts.
Champ Ls pan.
I will fab the tranny mount.
Im going to swap my interior with the GTO's.
Other than reprogramming the computer to eliminate a codes like tank pressure, rear O2, ect. Can I use the stock GTO harness's? Do you know of anyone who put a GTO interior + wire harness in a first gen camaro?
Thanks again for you help and input.
Bill
I first wanted to say that you have a great site here! My head is spinning from all the information. Could you guys check out the parts Im planning on ordering soon to see if I these parts are mismatched? I want to use my stock steering.
GTO Ls1 and 4L60 trans.
Edelbrock long tube headers and mounts.
Champ Ls pan.
I will fab the tranny mount.
Im going to swap my interior with the GTO's.
Other than reprogramming the computer to eliminate a codes like tank pressure, rear O2, ect. Can I use the stock GTO harness's? Do you know of anyone who put a GTO interior + wire harness in a first gen camaro?
Thanks again for you help and input.
Bill
Last edited by Sunkistcamaro; 09-13-2009 at 10:13 PM.
#7
Staging Lane
iTrader: (3)
Join Date: Sep 2007
Location: Ann Arbor Michigan
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
good luck though i dont care for the 69's. I have a Gto ls2 06 motor myself in my 68 w/t56 , you should love the combo though. hands down i love the power and the relibility. any questions just ask..<<<