NEW GUY 91 mustang lx 6.0 LQ4 have a few questions
10-22-2009, 09:18 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Oct 2009
Location: auburn ma
Posts: 697
Likes: 0
Received 0 Likes
on
0 Posts
NEW GUY 91 mustang lx 6.0 LQ4 have a few questions hey, just picked up my LQ4 tonight swaping a chevy into a mustang has been something i wanted to do since i got the car ..it had a 331 stroker went ok , but i've always been a chevy guy ..
motors going to be carbed with a victor jr intake , and stock lower end
few questions ,,
1) what heads should i get ? 243's ? and whats the cost ?
2) and cam selection .thinking maybe 240 dur .600 lift ?
motors going to be carbed with a victor jr intake , and stock lower end
few questions ,,
1) what heads should i get ? 243's ? and whats the cost ?
2) and cam selection .thinking maybe 240 dur .600 lift ?
Last edited by Dickie-311; 10-23-2009 at 06:42 AM.
10-23-2009, 10:09 PM
#3
Teching In
Join Date: Jul 2008
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
the 243s and a cam around that size would go real nice, i know 2 camaros with that setup both dancing around 400whp, and i know another that has a little bit bigger of a cam but the 853 heads and he made 410whp...i think your setup idea is your best bet
10-24-2009, 12:27 AM
#4
TECH Enthusiast
iTrader: (6)
Join Date: Aug 2008
Location: DAVIDSON NC
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
243's or 799's work great....and check out tick performance(they are a sponsor on here)they have a cam called the polluter that sounds like its what you're looking for....make sure you tell who ever you decide to get a cam from that youre running a carb setup so they will know to put it on a different lobe seperation....mine is on a 110
Trending Topics
11-08-2009, 04:28 PM
#8
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Oct 2009
Location: auburn ma
Posts: 697
Likes: 0
Received 0 Likes
on
0 Posts
my car has a AJE k-member , just need to switch to a chevy mount and for a harness it's going to be a carb'd motor so not much of a harness just alt wires , and going make my own tranny crossmember .
