ac change over
ac change over hello ls1tech fam. im trying to finish my 5.3/4l60e swap but the old a/c compressor and condensor has not removed from the vehicle. i thought that to disconnect the compressor from condensor lines the refigerant must be removed from the system. friends tell me to disconnect and let it seap out. thats what was done at the junkyard. if this is done will will it affect the atmosphere. im not green, but i want to do whats right. by pics you can see that the old ac componets are currently connected. thanks.
Last edited by dec010974; Nov 1, 2009 at 08:27 AM. Reason: left out something
Judging by that blue cap on your accumulator, your truck has been changed over to 134a at some time. They say 134a doesn't hurt anything, so if it were mine I'd probably just open a line SLOWLY and put a rag or something over it to keep the oil from going all over, and you should be fine.
The schrader valve is the little valve inside the A/C fittings. They are also found in tire valve stems. The tool to remove them is the same and looks like a 1/8th inch steel dowel with a slot. You can also put a BB or something similar under the cap and tighten it just a little to let the freon out. That was a trick people used to do to flatten tires as well.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Albeit a little different than most. I'm in the process of putting a 5.3L in my Jeep cCherokee and there isn't enough room for the stock A/C compressor. Noval conversions offers one that places a compressor high on the passenger side. Problem is, I need that spot for my onboard air compressor.
So has anyone found a smaller, more compact compressor that they've been able to mount in the stock GM location?
FWIW,
I'm in the HVAC biz, so I'm familiar with A/C systems, just not well versed in automotive compressor retrofits.
So has anyone found a smaller, more compact compressor that they've been able to mount in the stock GM location?
FWIW,
I'm in the HVAC biz, so I'm familiar with A/C systems, just not well versed in automotive compressor retrofits.
That said, S&P makes a kit that mounts a Sanden in the factory (C5) location but moves it inboard 4" and uses the main pulley sheave. Pretty expensive, but if you need the room... Here's a pic:
