LS^ Valley Cover?
I don't have any problems with it on my LQ4 Block, it works great. I didn't know you had to cut on the inside of the Blocks..
Last edited by the_merv; Nov 20, 2009 at 10:32 AM.
I think he means if you have a block that won't accommodate the Ls6 oil-separator see http://www.ls1howto.com/index.php?article=18 half-way down the page.
If you have a later block or use a later valley cover then this isn't an issue.
If you have a later block or use a later valley cover then this isn't an issue.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo The LS2 Aluminum Engines and anything after that in the Cars are Gen IV. The L92 Truck Engines are Gen IV. There are some Iron Block Gen IV Engines too from what I have read.
What is your block?
What is your block?
Banned
Joined: Jun 2007
Posts: 39
Likes: 0
Banned
Joined: Jun 2007
Posts: 39
Likes: 0
