Fuel Shutoff in accident?
01-05-2010, 09:52 PM
#21
01-06-2010, 10:21 AM
#23
TECH Regular
iTrader: (5)
Join Date: Jan 2008
Location: Sparta, Mo. in southwest Missouri
Posts: 452
Likes: 0
Received 2 Likes
on
2 Posts
I've got MR Gasket low oil pressure safety switches on the fuel pumps on both of my carbureted street rods, but after reading this thread, I'm going to install the Ford enertia swithes on both. I'm also glad to hear there is one with a light to tell you when it's tripped. Very good info, everyone.
04-25-2010, 07:12 PM
#24
On The Tree
iTrader: (5)
Join Date: May 2008
Location: Moorhead Minnesota
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
Here is a pretty cool article I found on the ford inertia switch, a worth while read imo.
http://www.therangerstation.com/tech...tiaSwitch.html
http://www.therangerstation.com/tech...tiaSwitch.html
04-26-2010, 01:17 PM
#25
On The Tree
iTrader: (5)
Join Date: May 2008
Location: Moorhead Minnesota
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
Just went to the Junk yard and picked this out of an '04 Escape (I believe) for $15. It's only a two wire, but it does have a prong for a third connection. Super easy reset button, more so than the explorers I found. Plus it was only held in by two large screws, not the two or three tiny bolts (Under 1/4") that the explorers use.
