My 95 S10 Nitrious 5.3 Drag Truck project....
03-09-2010, 07:14 AM
#85
On The Tree
Join Date: Feb 2007
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
Do you know if those are the same length as s10 rear ends? i can deal with something that is a little longer (1-2inchs per side perferably)
03-09-2010, 10:52 AM
#88
TECH Fanatic
Thread Starter
iTrader: (4)
Join Date: Jul 2007
Location: Davenport, IA
Posts: 1,351
Likes: 0
Received 0 Likes
on
0 Posts
as far as boost, we'll see
03-11-2010, 11:55 PM
#96
TECH Fanatic
Thread Starter
iTrader: (4)
Join Date: Jul 2007
Location: Davenport, IA
Posts: 1,351
Likes: 0
Received 0 Likes
on
0 Posts
Update right now is i'm broke as a joke at the moment lol, working on saving up to finish up the expensive *** fuel system. Need around 500 to finish that. Then need around 300ish for misc stuff to get it started like wiring, aluminum for dash, seat brackets, and some small stuff...
Not running any aftermarket headers, doing 98 fbody manifolds with the collectors cut off, will have some tube extention on it then some clamps...
Not running any aftermarket headers, doing 98 fbody manifolds with the collectors cut off, will have some tube extention on it then some clamps...
03-19-2010, 11:02 AM
#97
TECH Fanatic
Thread Starter
iTrader: (4)
Join Date: Jul 2007
Location: Davenport, IA
Posts: 1,351
Likes: 0
Received 0 Likes
on
0 Posts
Little update-
I have almost all my fittings and everything needed to complete the fuel system besides my injectors. Will be ordering those in two weeks with my next check.
Still waiting on my Rad/fans to come in. Will be buying the rest of my fittings and a few misc things tomorrow at the local speed shop and YatesEFI should be finishing up tuning my PCM and have that and my wiring harness done for me sometime this week.
Also going to order up some mandrel bends offline so i can get the exhaust finishded up for now.
All that is left after that stuff is the small misc stuff like wiring gauges, lights, and switches. Buy a battery, Mount rad/fans and get rad hoses. I want to get a Grant steering wheel, need to mount my seats, bend and mount dash and door panels. and get plexi glass for the rear window. So i'm hoping on this coming check or the next i should be able to get this thing on the road!
Will post an update this weekend if i get anything major done!
I have almost all my fittings and everything needed to complete the fuel system besides my injectors. Will be ordering those in two weeks with my next check.
Still waiting on my Rad/fans to come in. Will be buying the rest of my fittings and a few misc things tomorrow at the local speed shop and YatesEFI should be finishing up tuning my PCM and have that and my wiring harness done for me sometime this week.
Also going to order up some mandrel bends offline so i can get the exhaust finishded up for now.
All that is left after that stuff is the small misc stuff like wiring gauges, lights, and switches. Buy a battery, Mount rad/fans and get rad hoses. I want to get a Grant steering wheel, need to mount my seats, bend and mount dash and door panels. and get plexi glass for the rear window. So i'm hoping on this coming check or the next i should be able to get this thing on the road!
Will post an update this weekend if i get anything major done!